Skip to main content

Copper Poppy Cuff Bracelet


I've been making bangles for a few years now but have never thought about making cuffs until recently. Cuffs are very popular especially in copper as some people believe the copper helps with arthritis pain {although there's no scientific proof of this}.

I decided to start making a couple of narrow copper cuffs to see how it goes and whether they sell.

handmade copper cuff © cinnamon jewellery 2017

Copper cuff with hammered bark texture


 Copper cuff with leaf vein texture

I spent a stupid amount of time trying to work out the sizing of cuffs which isn't as simple as it might seem! I make them to fit the buyer's wrist size not a general 6 inch length piece of metal fits all approach {it doesn't}. After making a couple for myself I finally worked out how to get the sizing right. I haven't had any returns yet so the sizing must be ok....:D

Soon after I started listing the cuffs I got a request from a buyer in France who had bought one of my copper poppy bangles ....


She asked to return it as it was too big and asked if I could make a cuff bracelet/poppy bangle mashup
instead. Of course I said yes and set to work.


I started by marking the centre point on a length of flattened copper wire that I'd embossed with a leaf skeleton.


I used a centre punch to make a divot on the mark.


After cutting the cuff to length, finishing the ends and shaping it I used the divot I'd made to drill a hole.


I made a copper poppy, filed a flat spot on the underside of it, balled up the end of a length of copper wire and filed a flat spot on the cuff where the copper poppy would sit.


I attached the copper poppy and wrapped the wire around the cuff on both sides.

handmade copper cuff bracelet with copper poppy © cinnamon jewellery 2017

The cuff ready to go in the pickle pot before soldering.


After soldering.


The copper cuff cleaned up and ready for oxidizing. At this point I was convinced the size would be wrong. The buyer had a 6 inch wrist so I made the cuff to fit but it looked so small to me!

copper poppy cuff with leaf vein texture © cinnamon jewellery 2017

The finished cuff bracelet. I've since heard from the buyer in France who was very happy with it and said it fitted her wrist fine which is great!

I am planning on expanding my range of cuff bracelets to include the poppy version and also a version with added silver pieces and maybe semi-precious cabochons. 
I think getting these up and running in time for Christmas might be a good idea!


Labels:

Comments

  1. DeborahRead.comTuesday, November 07, 2017

    Love them !

    ReplyDelete
  2. Miss Val's CreationsWednesday, December 27, 2017

    Beautiful piece Tracy! It is so gratifying when a customer lets you know they love their jewelry. :)

    ReplyDelete
  3. UnknownWednesday, October 09, 2019

    Really Awesome collection Jewellery.. Making these kinds of jewellery is never easy you are so artistic. My grandmother always used to say that wearing copper is very healthy…Thanks for Sharing!!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

My Jewellery Shed Gets A Lick Of Paint

At the end of last summer, after an incredibly busy few months jewellery-wise, I decided to take a break and repaint my shed. I'd painted it a pale green colour when I first got it and it was starting to look a bit faded and sad. So I did what I expect most people do and started looking online at what wonderful colour I could repaint it. There are lots of great colours out there by Cuprinol and Ronseal and the DIY stores own brands. I took a long time deciding on a colour then got in the car to go and buy the paint. That's when I discovered that B&Q and Homebase only carry a limited selection of shed paint colours {8 if you're lucky} and if you then find something in stock you do like they quite often don't have it in the size pot you need! So the colour I bought was a bit of "Oh buggar it, that'll have to do". Luckily it turned out to be similar to what I'd originally wanted by the time I'd finished the third coat - yes it took three coat...
5 comments
Read more

Etching Copper With Ferric Chloride

 I decided recently that etching is one of my favourite things to do with metal. I read about it online quite a while ago and immediately thought it looked cool but the thought of using an "acid" and having to find somewhere to store it (a perennial problem when you don't have a workroom) put me off. So instead I admired etched copper from afar. Until I got a bee in my bonnet about it again and bought Lexi Erikson's copper etching dvd. Lexi Erikson is very good at explaining jewellery techniques and making them seem much more straightforward than they first appear. I already knew that ferric chloride was a salt and not an acid so wouldn't eat my flesh through to the bone if I accidently spilled some on my hand. The dvd made me feel much more comfortable about having a go so I ordered some ferric chloride from ebay and bought some stamps and StazOn ink from a local craft shop. My first attempt went ok but for some reason I left the copper to etch for an hou...
11 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more