Skip to main content

My First Torch Enamel Project In Making Jewellery Magazine!


Issue 71 of Making Jewellery magazine comes out today {21st Aug} featuring lots of fab projects including my first torch enamel project for a magazine. I've done several wirework step-by-steps for Bead magazine in the past but never anything involving enamel so it was a treat to do it.

I was emailed by Sian the editior of Making Jewellery a few months ago asking if I'd like to contribute a project. I said yes {of course!} then immediately wondered if I was going to be asked to make a wirework piece. I don't make much wirework jewellery these days so was really pleased to be told I could do a project using torch enamelling as they hadn't had any torch enamelling projects in the magazine before.  

After finding out the theme for the issue was going to be "autumn" I decided to go for a copper leaf enamelled in a blend of lovely autumn-ish colours and made a pendant as the main piece and a pair of earrings and bangle charm as the two "extras".


That isn't a photograph of me by the way! {I think it's Abby Clancy, I was busy that day.....}

I took some photos of the pieces I made before sending them off to the magazine to be photographed and made a collage......... because I like making collages :D


I was pleased to see Kristen, a fellow jewellery maker whose blog K S Jewellery Designs I follow, also has a project in this issue! She went with the leaf theme too and made a very pretty silver and bead wirework necklace and pendant.
It's nice to be in good company!




Labels:

Comments

  1. Divya NThursday, August 21, 2014

    Congrats on being featured and I love that little cut on the leaves

    ReplyDelete
  2. NaiadNecklacesThursday, August 21, 2014

    Beautiful! Congrats!

    ReplyDelete
  3. K S Jewellery DesignsThursday, August 21, 2014

    Hey Tracy!
    I saw your lovely project in Making Jewellery today. I'm in there too - see page 62!
    Kristin :)

    ReplyDelete
    Replies
    1. K S Jewellery DesignsFriday, August 22, 2014

      Awww... thanks for the mention Tracy. I was so excited to see you in Making Jewellery too and see you blogged about it, I didn't fully read your post!
      Kristin :)

      Delete
    2. Cinnamon JewelleryFriday, August 22, 2014

      That's ok Kristin :D

      Delete
  4. littleRamstudioFriday, August 22, 2014

    Well done on the Magazine Article and fabulous choice to showcase. The colours are beautiful!
    Heather :)

    ReplyDelete
  5. Miss Val's CreationsFriday, August 22, 2014

    Congratulations on the feature Tracy! It looks great.

    ReplyDelete
  6. DeborahRead.comTuesday, August 26, 2014

    Congratulations - I'll have to check out his magazine - the enamel work is wonderful !

    ReplyDelete
  7. lovesilverpalaceTuesday, September 30, 2014

    hello ...love your jewelry
    excellent work !!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

My Jewellery Shed Gets A Lick Of Paint

At the end of last summer, after an incredibly busy few months jewellery-wise, I decided to take a break and repaint my shed. I'd painted it a pale green colour when I first got it and it was starting to look a bit faded and sad. So I did what I expect most people do and started looking online at what wonderful colour I could repaint it. There are lots of great colours out there by Cuprinol and Ronseal and the DIY stores own brands. I took a long time deciding on a colour then got in the car to go and buy the paint. That's when I discovered that B&Q and Homebase only carry a limited selection of shed paint colours {8 if you're lucky} and if you then find something in stock you do like they quite often don't have it in the size pot you need! So the colour I bought was a bit of "Oh buggar it, that'll have to do". Luckily it turned out to be similar to what I'd originally wanted by the time I'd finished the third coat - yes it took three coat...
5 comments
Read more

Etching Copper With Ferric Chloride

 I decided recently that etching is one of my favourite things to do with metal. I read about it online quite a while ago and immediately thought it looked cool but the thought of using an "acid" and having to find somewhere to store it (a perennial problem when you don't have a workroom) put me off. So instead I admired etched copper from afar. Until I got a bee in my bonnet about it again and bought Lexi Erikson's copper etching dvd. Lexi Erikson is very good at explaining jewellery techniques and making them seem much more straightforward than they first appear. I already knew that ferric chloride was a salt and not an acid so wouldn't eat my flesh through to the bone if I accidently spilled some on my hand. The dvd made me feel much more comfortable about having a go so I ordered some ferric chloride from ebay and bought some stamps and StazOn ink from a local craft shop. My first attempt went ok but for some reason I left the copper to etch for an hou...
11 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more