Skip to main content

Pearls, Hoops And Stacking Rings


I'm slowly increasing my little collection of rings for sale. I made a set of three hammered sterling silver stacking rings which you can see in the photo above put together with a prehnite rose cab stacking ring. I made the plain band rings in the photo for me (for a change!) and find them so easy to wear.


 I photographed them in their bright shiny state then oxidized them and photographed them again. 
Etsy makes it easy to sell items with different variables like size or finish so the buyer can select when they pay. My website and Folksy shop don't have this option so I'll have to list the rings separately. I've learned that buyers don't always read everything in a listing ( something I'm also guilty of!) and I've had to contact a few to find out the size they want in the case of bangles bought from my website and Folksy. So expecting someone to remember to let me know the size, stone and finish they want in the case of my gemstone rings would be pushing it a bit! So when I get round to listing the gemstone rings on my website and Folksy shop they will all have to be listed separately with a large notice asking the buyer to let me know the size and finish they want in the hope they will actually do that and save my sanity! 


I spent the last couple of days making a pair of copper rose hoops and some silver disc earrings with pearls. The turn in the weather (it's sunny!) means I've been able to photograph them today.


I use copper bezel wire for the "roses" which makes life easier than having to cut thin strips of copper sheet myself. I solder the end closed then sand the bottom flat and solder to a flat piece of copper for a base. Having a flat base makes it easier to solder the rose to other things afterwards.


The pearls are beads I've had for years that are button shaped so most of them are ideal to turn into cabs. Sanding the bottom of the pearl makes it nice and level and lowers the holes so the bezel hides them when they are set. I like the look of pearls with oxidized silver. I have some bigger pearls on order which I'm really looking forward to using.


I'm hoping the pearls will arrive soon (tomorrow would be good!) so I can start thinking about what to do with them. 
•♥•
Labels:

Comments

  1. Miss Val's CreationsFriday, March 07, 2014

    I love the stackable style rings! Your earrings are gorgeous. The "roses" are so sweet.

    ReplyDelete
  2. BijuteriiSunday, March 09, 2014

    I love the earrings, they are awesome! Big Like :)

    ReplyDelete
  3. MonicaMonday, March 10, 2014

    Wow, wonderful!!!

    ReplyDelete
  4. tajpearlSaturday, April 05, 2014

    wonderful earnings !! i also like these beautiful rings. great collection.

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more