Skip to main content

Using Copper And Enamel To Make Your Own Cabochons


One of the things I wrote in my "things to do in the new year" list was to make more enamelled cabochons. I'd previously made a couple of 9mm small enamelled cabs which were a bit fiddly so I thought I'd make life a bit easier and go bigger this time. I also mixed the colours instead of sticking to just the one for a bit of variety. They are easy to make - just cut and dome a copper disc and enamel it! I still counter enamel the discs (just in case) then flip them over to do the fun side. You need to use a binder like Klere Fyre (which is spelt really oddly and I can never remember it!) as the domes are fairly steep and the enamel will fall off without something to stick to. Once they are done you carry on as with a normal cabochon. I use a wooden bezel pusher (an adapted peg in other words) as I invariably slip at some point when setting and I've had enough of ruining a piece at the very last stage by slipping and scratching the stone which is what usually happens when I use metal setting tools.

I made a pink cab using pastel pink opaque with a raspberry transparent on top and a green-turquoise version made with a blend of blues and greens topped with transparent turquoise. And here's what I did with them........






The turquoise green version is teamed with an amazonite cabs and silver textured using patterned card. I used sterling silver tube for the bail which is super easy if you just want something simple.


My new favourite jewellery-related programme at the moment is Gem Hunt which is on the Travel channel at 9pm week nights at the moment. It follows three "gem hunters" - a gem dealer, jewellery expert and a geologist as they travel abroad looking for gemstones for clients and for their own businesses. It's very American in that it tries to make everything seem very dramatic, constantly repeats what you already know and feels the need to explain what's going on despite the fact you've just watched what's going on....but the people are likeable and the gemstones they are looking for are stunning. They pay big prices for them but make absolute fortunes in some cases once they are cut and sold on. Worth a look if you are interested in gemstones :D

Comments

  1. Love them! Those enamelled cabochons are so so pretty! Might have to try it one day :)

    ReplyDelete
    Replies
    1. Thanks Em! I love being able to make a cab in any colour I want with enamel :D

      Delete
  2. Lovely jewelry, wonderful photograph! love them :)

    ReplyDelete
  3. These cabs are beautiful! I linked to this post in my weekly craft roundup on CraftsCrazy: http://craftscrazy.com/weekly-craft-roundup-feb-15-2014/.

    ReplyDelete
    Replies
    1. Thanks Beth, I've just read your post and left a comment.

      Delete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco