Skip to main content

Rings And Gems!


I posted last week about Joopy Gems and the order of pretty 6mm rose cut cabochons I was eagerly waiting for. Well they arrived last Friday, which is pretty good going considering they were posted in Hong Kong on the Monday. And I didn't have to pay any VAT on them which was even better!



I was really impressed with the quality of the cabs and the faceted top side makes them sparkle nicely in the light. I got to work making rings with them that I'm going to start selling made to order. They do look very pretty so I'm just going to have to make myself a couple! I'm planning to add some plain textured silver stacking rings too so they can be mixed and matched with the gemstone rings.




I also made a couple of twist rings using thin strips of silver and copper to make stylised roses (use your imagination!) I think I'll just make these in particular sizes to start with rather than made to order...... but that may change!




I bought myself a proper ring mandrel too. I had been using an aluminium UK ring sizer not realising it wasn't a proper ring mandrel. I don't know how I thought it was as it's shorter and not as hard as steel so it's looking pretty sorry for itself now. You can see the shiny new steel version in the ring photo above. So there'll be no stopping me now :D

If you would like a 15% discount off your first order from Joopy Gems this link
will take you to a discount code that you can use with your order. I'm going to place another order with them very soon!
Labels:

Comments

  1. littlecherryhillFriday, February 28, 2014

    Love the new gemmy rings! But I really love that Copper Rose ring!!

    ReplyDelete
  2. Cinnamon JewellerySaturday, March 01, 2014

    Thanks for your comments!

    ReplyDelete
  3. Miss Val's CreationsMonday, March 03, 2014

    The faceted cabochons are adorable and beautiful! I love the simple setting you have created. Those folded rings are fantastic as well. Awesome work as always. :)

    ReplyDelete
  4. K S Jewellery DesignsFriday, March 07, 2014

    Loving your rings and love the way you have set the faceted cabs shaping the bezel around the faceting, it makes them look very beautiful. Good luck with lots of sales :)

    ReplyDelete
    Replies
    1. Cinnamon JewelleryFriday, March 07, 2014

      Thanks Kristin. I received my 2nd order from Joopy Gems today so have a few more lovelies to play with :D

      Delete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more