Skip to main content

Sterling Silver Hoops with Glass Cabochons




I went through a hoop phase a couple of weeks ago when I just had to make some hoop inspired jewellery. I quite often get these urges - sometimes it's for enamel, sometimes it's etching, it just depends. I'm currently in the grip of a hollow form phase but I'm having to wait for supplies before I can go any further which is a bit annoying but does serve to make me think about it a bit more before diving in!


I wanted to continue my bezel setting practice so I added cabochons to the hoop earrings and pendants. I stamped a circle design onto the hoops and added a jump ring at the top then pierced out the part of the hoop in the centre of the jump ring to make a cute hanging hole.


The glass cabochons are from a Turkish shop on Etsy and are lovely!  They remind me of jelly sweets.
Tip! Put a piece of aluminium foil behind the glass cabs before setting them. The foil gives them a luminous glow in the light and avoids the backs of the bezels darkening and dulling the colour due to the silver oxidizing over time. Cutting the foil discs neatly to avoid too many creases is easier said than done! Luckily these were the same size as one of the holes on my disc cutter so I used that to cut them. One thing I soon realized was that the silver on the bottom of the bezel needs to be completely smooth otherwise any bumps (from solder, etc) will transfer through the foil and show on the bottom of the glass cabs as dark patches. I had to abort two pairs because of this before I figured out what was going on. I think the solution is to add a disc of sanded copper under the foil so then you know it will definitely be completely flat and smooth.


 I love the delicate ghostly colour of the pink glass.





A simple pair using the greeny-turquoise colour glass. This is the first time I soldered jump ring links onto the tops of bezels to thread the earwires through and thankfully I managed ok and it worked. It can be fiddly and I'm not that great yet with the combination of soldering and fiddly. Still learning!

Labels:

Comments

  1. Fanciful PonderingsWednesday, May 29, 2013

    You say your still learning but I think you have it down pat, beautiful work!

    ReplyDelete
  2. ManekiWednesday, May 29, 2013

    The look lovely! Frosted glass gets such a beautiful glow when backed with foil -- it's a small detail that makes a big difference, really.

    (Myself, I've added variegated leaf metal to tumbled cabs and rivolis, getting both glow and colour/pattern.)

    ReplyDelete
  3. Cinnamon JewelleryThursday, May 30, 2013

    Thanks for your comments!
    I am finding setting cabs a bit easier the more I do.... :D

    I also thought about putting different colour paper (maybe?) or foil behind the frosted glass cabs to see what the effect would be but haven't tried it yet.

    ReplyDelete
  4. UnknownMonday, June 17, 2013

    Wow such a beautiful earring.With this earring we wore matching dress.
    Thanks for sharing this.

    Jewellery Gippsland

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more