Skip to main content

New Copper And Silver Earrings

I've been playing with my Bigshot and the Vintaj design folders again. I've decided to rechristen them "design" folders rather than etch folders as the end result looks nothing like an etched piece of metal!
I used 20g copper sheet annealed first to soften it then rolled through the Bigshot. It goes through fine but my cutting pads are suffering a bit and now are both bowed in the centre. Completely useless if I want to use my envelope dies so I guess I'll have to buy some replacement pads soon......


I made a simple pair in sterling silver too. I cut the shape using Xuron metal shears - very impressed with those and they save having to get my saw out and the ridiculous small plastic stool I have to sit on for piercing as the table is too low to use a normal chair!



I also did a bit of simple soldering and made these bead and hoop style silver earrings. Can you tell how much I love these czech glass rondelle beads?!





Comments

  1. Very cool earrings! Love the idea that you can emboss without a rolling mill!

    ReplyDelete
  2. Adorable! That is so easy but so lovely. Thank you for sharing.

    ReplyDelete
  3. Lovely and beautiful earnings , I like it .Thanks for sharing it .

    ReplyDelete
  4. What a awesome collection you have. These earrings must provide a great shine in a party. this all're surely class apart!

    ReplyDelete
  5. Love the earrings and the embossing. You cut the shapes out with shears, not a saw? I always get shapes that are bent on the edges when I use shears. Could I ask what model you use?
    Great earrings!!!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco