Skip to main content

Eclectic Handmade Jewellery By Little Largo

Folksy, a wonderful UK site for all things handmade, is a great place to start if you are looking for jewellery. Not just any jewellery but handmade, original and just that bit different. From classic designs to rustic, quirky and kitsch you will find it on Folksy

One of my favourite fellow jewellery makers on the site is Haldis Hughes, owner of Folksy jewellery shop Little Largo. Haldis is based in Scotland and from her home studio loves to create jewellery using her skills in metalwork




Haldis creates stylish understated earrings, bracelets and necklaces using sterling silver and copper on their own or together with a rainbow of colourful beads. From simple hammered sterling silver and copper disc earrings to hand forged metalwork, crystal and gemstone creations you will find it in Little Largo




Everything is beautifully photographed and Haldis also offers a custom order service for buyers who have their own design in mind




From rustic oxidised copper to classic pearls Little Largo has something for everyone!
Visit Haldis's new blog : Little Largo Jewellery
 




Labels:

Comments

  1. I love the green earring in your first pic and they are amongst my favourites on Etsy. Beautiful work!

    ReplyDelete

  2. Bev, thanks for your complement. And a huge thanks to Tracey for featuring me on her fab blog Haldis

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern". 
I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or someone…
30 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!)
I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing!


I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco Embossin…
24 comments
Read more

Rolling Mill Textures On Metal

I had another play with my rolling mill last week using some of the texture sheets from Etsy shop Rolling Mill Resource. I used some sterling silver and copper sheet and soon discovered it's best to get organized before you start!

I cut the sheet to size and worked out which design was going on which piece of metal. I also tried a feather but more on that later. Most of the sheet I used was 20g/0.8mm with one piece of 18g/1.0mm and one of 22g/0.6mm.
I've read that you should do a dead pass of the metal through the rolling mill with the gap the same size as the metal and texturing item. I'm not sure what this is supposed to achieve but I don't bother doing it. Judging the correct size of gap between the rollers is a trial and error thing that you discover by setting the gap then starting to roll the metal through. If there's too much resistance you make the gap bigger until there's just enough resistance to roll the metal through without giving yourself a herni…
15 comments
Read more