Skip to main content

Silver Filled Wire Earwires.........At Last!

I've finally done something with the silver filled wire I bought a while ago - made some basic earwires! I've just listed them in my findings shop on Folksy and my eBay shop Cinnamon Jewellery Findings (did I mention I had an eBay shop? It's a bit of an experiment really).

I had planned on making headpins too but couldn't work out why I was struggling to make a decent start to a spiral then realised the wire was half hard and I'm used to working with dead soft in sterling!

I'm finding the half hard quite hard to work with (ok for earwires though) - spirals look lumpy and when I tried to make a swirly rosette at the end of a headpin the wire actually snapped! I thought about buying some dead soft silver filled but the price plus postage would mean the end cost would be pretty close to sterling so I knocked that idea on the head.............

Anyway, I've made some hoop style and hook style earwires - nice and shiny and a pretty decent price too :D



Labels:

Comments

  1. lisbonlionessFriday, June 24, 2011

    they are beautiful! A lot prettier than those everyday sp generic findings. Nice work!

    ReplyDelete
  2. somethinguniqueFriday, June 24, 2011

    Hi, thanks for showing the earwires, i am still not sure about the wire i am confused about the difference in price points one shop selling for $30 and one for $7 for the exact same gauge and temper.????? they lokk lovely though>
    ttfn Lana :)

    ReplyDelete
  3. Cinnamon JewelleryFriday, June 24, 2011

    Thank you for your comments!
    The more expensive version has a thicker layer of sterling I think.....

    ReplyDelete
  4. Miss Val's CreationsFriday, June 24, 2011

    The ear wires came out beautiful!!!! ~Val

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more