Skip to main content

Lost Connection and New Earrings


Last Tuesday one of the things I dread happened and I lost my internet connection. Not a good thing when you sell online and especially at this time of year!  A phone call to my ISP informed me "everything's alright our end, you need to get BT to check your line". BT checked the line - it was fine so I reinstalled the modem drivers (yet again) but still no connection. Another phone call to my ISP and they suggested replacing the microfilters - "they only cost a couple of quid" the man said, actually they cost £10.99 each from Comet so needless to say I didn't buy them!
So after yet another phone call to my ISP they said they would send me a new modem - which still hasn't arrived!

In the meantime I had people I needed to email so resorted to using my mobile to get on the internet. Oh my God - how slow! Fine if you've got three other things to do at the same time as waiting for a page to load, they were taking at least five minutes. I did manage to relist an item in my Folksy shop - it took an HOUR! And that was just relisting!

I'm now online again with a shiny new laptop (early Christmas present, thank you Dad!) but I've got to admit I prefer my pc, the picture quality on the laptop is rubbish - all the photos on sites like Folksy are blurred and pixelated so if anyone has any ideas how to improve them please let me know! In the meantime I will continue to wait impatiently for my new modem to arrive..............

New Earrings
It was lovely and bright yesterday so I took some photos of the new earrings I made recently (before my tripod broke!) soon to be listed on Folksy and Artfire.
On a lighter note I did get a nice surprise in the post on Friday - a £200 tax rebate!

Dogtooth Amethyst and Sterling Silver Hoops

Botswana Agate and Sterling Silver

Green Freshwater Pearl and Sterling Silver

Dogtooth Amethyst and Sterling Silver

Comments

  1. GORGEOUS earrings! I especially like the first ones :)
    I hate it when you lose internet connection! I have a blackberry though, so if I lose connection I still get my emails through that. Definitely recommend getting one, it's so handy!

    ReplyDelete
  2. erghhh! Internet connection fail is the worst! I get lost if switch it off switch it back on again doesn't work, lol.
    Loveing the Hoop earrings, they are sure to sell well!

    ReplyDelete
  3. Ooh love those amethyst earrings! They're delicious :) Hope you're internet's sorted soon, I'm afraid I've got no clue on making your laptop images sharper though :(

    Laura
    x

    ReplyDelete
  4. Thanks for your comments, still waiting for the new modem to arrive!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco