Skip to main content

Sterling Silver Headpin Destash!

Just a quickie to say I've just listed some 2" Sterling Silver 24g headpins in my Folksy Shop for a bargain 30p a pair.

I had a mini destash yesterday and found them looking all sad and rejected in my bead box. I tend to use thicker gauge wire these days so I've decided to offer them up to good beading homes.

Available in 10 and 20 pairs so ideal if you just need a few or fancy a change from silver plated headpins and at 30p a pair they are cheaper than lots of places I checked out on the internet!

~♥Available here ♥~


Labels:

Comments

  1. CindyMonday, July 19, 2010

    You know I love your wirework...but your photography is just incredible too! Do you use a macro lens?

    ReplyDelete
  2. Cinnamon JewelleryMonday, July 19, 2010

    Thanks Cindy! Will leave a comment on your blog

    ReplyDelete
  3. hello gorgeousTuesday, July 20, 2010

    Hey gorgeous, Twenty Question time! Fab responses to the questions, thanks for participating :o) xx

    LOVIN' how the blog looks now, it's so clean looking. I have a question tho' - when I changed mine to three column I wanted a larger middle column but just couldn't get it right - do you know what the widths are on your three? And what the OVERALL width on your page is?

    Have a fab day.......

    hugs

    hello gorgeous xxx

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more