Skip to main content

New Copper Bangles With Silver Wrap Bead


I had a break recently and took the opportunity, once I'd caught up with lots of other things, to make some new stuff.

I wrote a post a while ago about making metal wrap beads in copper with the thought of doing a sterling silver version and that's one of the things I did in my break.

I had the idea of having a set of three bangles with three beads on just one of the bangles and the other two plain with a hammered finish. Then I decided it would look a bit more contemporary {to me anyway!} to have just one bead on each of the three bangles.

I started with some silver sheet I put through the rolling mill until it was about 0.25mm thick. I used the wrap bead template I made myself......


...and cut three lengths for the beads. I used the smaller size this time. I made three bangles using 3.25mm copper wire that I textured with a hammer. I then flowed some solder onto the the silver sheet on the side that would later become the inside of the bead.
Then I soldered the wide end of it to the bangle.



Once I'd attached the end of the silver sheet to the bangle I used pliers to fold the end down so it sat close to the copper.


I then started to wrap the silver sheet around the copper bangle and form the bead.



Despite the silver sheet being very thin at 0.25mm there was still a fair amount of tension in it meaning there were gaps between the layers as the silver sprung back when I let the end go.

 I annealed the silver and pulled and squeezed the silver wraps to get them a bit closer together before I soldered the bead wraps together using the solder I'd flowed along the inside length earlier.


Bit of a blurred picture but you get the idea :D

I needed to sand the edges of the silver beads as they were a bit sharp in places due to the gap thing going on.

 I'll need to find a better way to wrap the silver bead so the layers sit close together. Maybe I need to be a bit more forceful and use my pliers or mallet to force the silver sheet into a tighter wrap. Or maybe I just need to anneal the silver a bit more before I wrap them - it needs some experimentation and knowing what I'm like, will bug me until I get it right!


The shiny finished version before oxidizing.


Being cleaned up with wire wool before going into the tumbler for a polish.


Finished! 

These will appear in my Etsy shop and on my website very soon.













Copyright © 2016 Cinnamon Jewellery. All rights reserved.

Comments

  1. Oh I love! It is neat seeing how you created the wrap around the bangle. They have such a great look.

    ReplyDelete
  2. Wow it gorgeous, I love copper bangles (usually with a worn in patina) but in this design I somehow like the shiny version better as it looks really luxurious

    ReplyDelete
  3. They're so beautiful! The silver beads add an interesting detail, love the texture and the patina!!

    Awesome work!!

    Laura xo

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco