Skip to main content

Making My Own Copper Ponytail Holder



I am rather fond of a ponytail. I put my hair in a ponytail a lot - when I'm making jewellery, swimming or just need it out of the way. I usually just grab a covered elastic band but sometimes I fancy something a bit nicer to adorn my barnet {"barnet fair" - Cockney rhyming slang for hair}.

I have a decorative, plastic ponytail holder with a now very tired and stretched bit of elastic attached to it which I've been trying to replace for ages but haven't managed to find anything when I've been out and about. But through the power of Pinterest and the random journey I embarked on one day - I think it started with me looking at enamel stuff then seeing something pretty and veering way off track until I found myself staring at a page of hair accessories - that I saw an idea for making your own ponytail holder and decided I just had to have a go.


I started by straightening the edges on a piece of textured copper I've had hanging around for a couple of years. It was just about the right size for the ponytail holder too which was lucky.


I then annealed and shaped the copper piece into a curve.



The next step was to make the loop that would hold the elastic band. I flattened a piece of 14g copper wire and made a loop then bent the ends of the wire to make some "feet" which is where the loop would be glued to the piece of copper.


Ready for oxidizing.


This is after I'd cleaned up the oxidized copper and glued the loop into position. I dithered a bit trying to get it centered then still managed to get it nearer one side than the other but once that Gorilla glue came into contact with the copper the loop wasn't moving anywhere :D 

I left it for the glue to dry for a couple of hours then decided to model it...


Welcome to the back of my head! A slightly messy ponytail but you get the idea.

I'm now planning on making another copper version but I think I'll curve it slightly more than this one and make the feet part of the loop flatter so there's a larger area for the glue. I think an enamelled version would be very nice too :D






Copyright © 2015 Cinnamon Jewellery. All rights reserved.
Labels:

Comments

  1. Divya NFriday, February 12, 2016

    This is so cute, I wear my hair in a ponytail everyday with scrunchies of different colors to match my clothes but a metal band would be so cool

    ReplyDelete
  2. Kalaya SteedeFriday, February 12, 2016

    You've been busy I see. :D Love the pony tail holder.

    ReplyDelete
  3. Miss Val's CreationsFriday, February 12, 2016

    It came out great! It must feel good to treat yourself, especially when it is something so useful!

    ReplyDelete
    Replies
    1. Cinnamon JewellerySaturday, February 13, 2016

      Yes I don't feel guilty for making this for myself as I did need one!

      Delete
  4. PriyankaWednesday, February 17, 2016

    This was truly a great, great idea! Will definitely try it out!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more