Skip to main content

Merry Christmas!


It's that time of year again and I've been MIA for the last couple of weeks as far as writing blog posts is concerned. After a slow start {and a little bit of complaining to friends on my part} my Etsy shop and website got really busy with lots of bangle orders and quite a lot of earring and findings sales too. It's great but I'm always a bit relieved when it's over and I can put my shops on holiday.

I already have lots of ideas for new jewellery for next year and despite enjoying the break I'm already  feeling some metalwork withdrawal symptoms so I'm not sure how long I will be able to stay out of my jewellery shed!
Wishing everyone who reads and comments on my blog a very Merry Christmas! The fact that you are reading my jewellery ramblings is very much appreciated :D





Copyright © 2015 Cinnamon Jewellery. All rights reserved.

Comments

  1. Merry Christmas to you and your family Tracy :)

    ReplyDelete
  2. Merry Christmas Tracy! It is great to hear of your much deserved successful holiday season. There is nothing better than loving what you do and doing it well! You'll probably be back at the work bench come Saturday! I actually felt bored yesterday since this week finally slowed down. The relaxing was much needed though!

    ReplyDelete
  3. Great news. Look forward to seeing some new designs in the new year. x

    ReplyDelete
  4. I hear you. Next year will be different for me. I will not be doing the holiday markets. It seems like I miss the holidays every time it rolls around. All the making and hiding out in my studio when I really want to play outside. :) So my intentions will be different for next year. I wish you a very happy New Year Tracy. Can't wait to see what we come up with in our metal head journey. I go to Yuma Symposium in February. Maybe you could come to? :) xoxo

    ReplyDelete
    Replies
    1. Wishing you a Happy New Year too Kalaya! I looked up Yuma and it looks really interesting. If only I could get there...

      Delete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco