Skip to main content

New Jewellery And A Pile Of Silver Bangles For Hallmarking



My recent break a few weeks ago gave me the chance to make a few new pairs of earrings and a couple of new bangle designs. I didn't go for anything too tricky with the earrings - I really wanted to use up some of my etched and patterned silver and copper and some of the {way too} many cabs I have at the moment!
I also made a couple of pairs of enamel earrings.

The above pair are made from copper sheet etched with a nail varnish resist to create a drop pattern. I used some half-drilled pearls that I sanded on the bottom to make them level then set them in fine silver bezels.


I also made some copper and carnelian earrings using some more etched copper.


I made both pairs with a stud fitting just for a change too.

 I also experimented with a wooden background as I fancied a change from the usual slate I use but I'm not sure about it and will probably go back to slate next time. I do like the weathered wood look for a background but finding a bit of weathered wood the right colour isn't that easy! I bought a wooden chopping board and stained it but it's not the same and not enough of a contrast in colour especially with copper and bronze.

 I did manage find a new larger piece of slate to use for my photos on the Topps Tiles website though. The slate I currently use is from a set of place mats and the pieces are a bit small for certain photo angles at times. You can order sample tiles on the website so I ordered a 30cm x 30cm slate floor tile for £2.49 with free posting. Bargain! It's a bit lighter in colour than my other pieces of slate so what it looks like in the photos and whether I like it remains to be seen ....:D



New silver studs



Speckled enamel earrings

I have also been busy making a pile of sterling silver bangles that will need to be sent off to the London assay office for hallmarking.


I have left it a bit late as I seem to still be in denial about Christmas and how close it really is. Once I get this lot back they need to be finished and polished, photographed then listed so I really do need to get them posted off as soon as possible.


I made quite a few flatter style bangles for hallmarking this time as it's a design I'm liking more and more. The width gives you more scope for texturing the silver and also makes soldering any decorative bits onto the bangle a lot easier. Always a plus!






Copyright © 2015 Cinnamon Jewellery. All rights reserved.
Labels:

Comments

  1. Divya NFriday, October 23, 2015

    the pearl earrings look love. Why dont you try staining some chipwood or light color wooden board (or plywood) with black acrylic paint? that I what I do for my jewelry as it gives a good contrast

    ReplyDelete
  2. Miss Val's CreationsFriday, October 23, 2015

    Your new studs are so cool! I love the texture and sheen of the bangles. So beautiful.

    ReplyDelete
  3. JanSaturday, October 24, 2015

    Tracy, Just Beautiful! I love the bangles with the mix of texture. Jan P

    ReplyDelete
    Replies
    1. Cinnamon JewellerySaturday, October 24, 2015

      Thank you Jan! I managed to get them all in the post to the assay office today :D

      Delete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more