Skip to main content

Liquid Enamel Abstract Scribble Earrings


I've had an idea floating around in my head this last week or so to make some enamel earrings using liquid enamel over a black base with an abstract and simple {very!} scratched design. 
My previously mixed liquid enamel colours had sat on the shelf for a few months since I last used them and had dried up so I needed to add some distilled water to them and stir like a mad thing to get them mixed and smooth again before I could start.

I decided to create a couple of new colours from two existing liquid enamel shades so added some more yellow and green to a boring green colour I had to produce the bright green shade in the middle. I also added more blue and green to another mix to produce the greeny-blue shade on the right. That's the great thing with liquid enamels - you can mix them and create new colours.

To begin I enamelled some copper shapes on both sides with an opaque black then applied a layer of liquid enamel.


On my first attempt the liquid enamel was too thick and when I scratched the design most of it flaked off in big chunks. So after a bit of swearing, I washed it all off, then added more distilled water to my liquid enamel colours and started again...


Liquid enamel layer too thick - you can see the bumps in it as it's drying.


Second attempt - much smoother. I've found the liquid enamel needs to be thick enough to cover the enamel/metal base properly but liquid enough to flow and find it's own level, especially if you need to add a bit more.

Now I did forget to take a photo of the scratching the design bit in my excitement but this is what I used.


It's a tool used in metal clay work and it should have a metal ball at the end. I have no idea what I did to it to make the ball fall off but filed and sanded the end was ideal to use to scratch through the liquid enamel layer!


The green-blue earring just after firing. The colour gets brighter as the copper and enamel cools. The scratched design was experimental and quite "loose" as you can see :D I think I'll call it "abstract"...
 I find it hard to be very precise with sgraffito designs!

The finished earrings. 




I got some crackling effects going on too which was unexpected but I quite like the look.
 I'm hoping my next attempts will be better. I think I'll add a bit more water to the liquid enamel so it's a bit thinner in the hope that will avoid the larger chunks coming off as I scratch the design.
As ever, working with enamel is a learning curve but it's fun to experiment :D



Copyright © 2015 Cinnamon Jewellery. All rights reserved.
Labels:

Comments

  1. littleRamstudioThursday, August 20, 2015

    Really love the scribble effect!
    Heather :)

    ReplyDelete
    Replies
    1. Cinnamon JewelleryThursday, August 20, 2015

      Thanks Heather! I may try for a more controlled scribble next time :D

      Delete
  2. Divya NThursday, August 20, 2015

    I have not heard of this technique before today, so its fascinating for me to see the process

    ReplyDelete
    Replies
    1. Cinnamon JewelleryThursday, August 20, 2015

      I'll try and remember to take photos of the scratching the design part next time :D

      Delete
  3. Kalaya SteedeThursday, August 20, 2015

    Nice that you are having fun experimenting. They look AWESOME! :)

    ReplyDelete
    Replies
    1. Cinnamon JewelleryThursday, August 20, 2015

      Thanks Kalaya, I was always really good at scribbling as a child!

      Delete
  4. Miss Val's CreationsThursday, August 20, 2015

    This is really neat Tracy. I'm sure with more practice you will be able to create even cooler effects! We have a jewelry making show that airs over here and I recently watched an episode on enameling. Now I want a starter kit to play with since I was so intrigued!

    ReplyDelete
  5. JordanTuesday, September 01, 2015

    It's always fun watching someone's process for creating art. Love how minimalist they end up looking!

    ReplyDelete
  6. KatieWednesday, October 07, 2015

    These are fantastic, I really love how each pair will always be different from the last.

    ReplyDelete
  7. Vintajia AdornmentsSaturday, September 03, 2016

    Hi Tracy,
    As you have discovered liquid enamel needs to be quite thin. If it is too thick you get lumps, if it is a bit thinner you get a broken circular pattern when fired.
    Tip - spit on the copper, enamel goes on much smoother, give it a tap with the brush and it will level out.
    cheers
    Greer

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more