Skip to main content

New Torch Enamel Project In Making Jewellery Magazine




I was on holiday last week but just before I went away to the land of beautiful sandy beaches and castles - Northumberland in other words - I had another step-by-step torch enamel project in issue 81 of Making Jewellery!

The magazine came out on May 28 and this time the theme for our projects was "tropical".


I decided to go for a colourful combination of orange and seafoam opaque enamel colours and make a hoop style earring with turquoise jasper bead decoration on the earwires. As we have to provide three pieces I also made another pair of earrings with turquoise jasper dangles and a pendant with {you've guessed it!} turquoise jasper bead links.

I've done a few projects for magazines now but I still get a little thrill every time I see one of my projects finished and published!







Copyright © 2015 Cinnamon Jewellery. All rights reserved.
Labels:
Location: Eastbourne, East Sussex, UK

Comments

  1. KasiaTuesday, June 09, 2015

    It must be great to see your own work in a magazine! I really like to colour combination on those pieces, and they're all lovely :)

    ReplyDelete
  2. Miss Val's CreationsThursday, June 11, 2015

    Congratulations on the publication! These pieces are beautiful. I love the color combination.

    ReplyDelete
  3. Kalaya SteedeFriday, June 12, 2015

    Bravo Tracy! Those earrings and pendant look fabulous! I love torch fired enamel. I'm about to go in the studio today and make some of my drop earrings for the Fest in Norfolk, VA next weekend. Thanks for inspiring me! <3

    ReplyDelete
  4. Divya NSaturday, June 13, 2015

    Firstly I love the new logo and the blog theme :) The nyour earrings are beautiful as usual - A great combination of colors - of the sand and the sea

    ReplyDelete
  5. LynnWednesday, July 29, 2015

    Your earrings and pendant are absolutely beautiful---I would love to read your article. Is that magazine available in the U.S.?

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more