Skip to main content

Malachite And Bronze Earrings Revisited


I haven't had much spare time recently so haven't had the chance to make much new stuff but I did get round to altering the etched bronze and malachite earrings I made a few weeks ago. I wrote in this post about how they didn't hang well. The design means they are a bit bottom heavy and hang at an angle like this....


So I was at a quandry with what to do with them. Do I leave them or do I cut them down and change the way they hang? I couldn't do any more soldering as the stone was set so I decided {eventually} to cut them down and add an earwire to the pierced hole at the top.


They now hang evenly but it was a shame to have to alter them although I have come to the conclusion that I'm not keen on the type of earwire I used originally for them. The type that is soldered to the back of the earring then formed into an earwire. The length of the wire and the size of the earrings meant the earwires could easily have been bent {accidently} out of shape. So it's something I wouldn't repeat on a larger earring. Not that I use that style of earwire that often anyway!

I also had the chance last week to finish a couple more of the "pod" earrings I posted about a couple of weeks ago, this time I made hoop versions using the sterling silver and bronze pods I made. I haven't had chance to photograph them properly yet but took a couple of snaps in my shed earlier today.



Bronze pods with bronze hoops



Sterling silver version

I'm up to date with my made to order stuff now so I might get the chance to take some proper photos of these today!


Labels:

Comments

  1. DeborahRead.comFriday, March 13, 2015

    I so loved those malchite in their original form - but then loved them cut down too - did you make small earrings from the cut pieces ? just love that design you used - was it a stamp or a rolling mill design

    ReplyDelete
    Replies
    1. Cinnamon JewelleryFriday, March 13, 2015

      Thanks for your comment Deborah. It was a shame to cut the earrings down. I can use one part of the cut off bits but the other had the earwire soldered to the back of it.
      I used a stamp and etched the bronze :D

      Delete
  2. Miss Val's CreationsFriday, March 13, 2015

    I actually think I like the shape of the malachite earrings more now with the cut you made! They are so pretty. That was a great learning experience. The pods are beauties too! Have a great weekend.

    ReplyDelete
  3. deborah foordSaturday, March 14, 2015

    I much prefer the cut down look...fab!

    ReplyDelete
  4. UnknownWednesday, March 18, 2015

    Hi! I am really enjoying your blog - have learned lots - so thank you. Just a quick question - slightly off topic - so I apologise in advance, but just wondering the type of tumbler you use - I am having a nightmare with mine - keeps falling on the floor - also what shape shot (stainless steel of course ;) ) do you use as having problems with shadows around the attachments to metal.

    ReplyDelete
    Replies
    1. Cinnamon JewelleryWednesday, March 18, 2015

      Thanks for your comment Niahm!

      I have a Lortone 3A tumbler and the shot I use is a mix of balls, cylinders and cylinders with angled ends. Not sure why yours is falling on the floor! Is it large powerful tumbler? Maybe try putting it on some of that non-slip matting you can buy?
      I sometimes notice a slight difference in the finish around attachments like bezels and silver balls after tumbling but I think it's because the shot pieces can't get to these spots. I use textured metal and oxidize it so any differences in colour/finish aren't that obvious at the end.

      Delete
  5. UnknownTuesday, March 24, 2015

    Oh snap! I think I messed up again. All because I have two gmail accounts but I won't bore you with the details! Bravo Cinnamon!!! I love the change up. Funny how a piece can sometimes force our hand and those pod earrings are very nice! :)

    ReplyDelete
  6. Meiko LucasWednesday, March 25, 2015

    If I hadn't looked at the original bronze earring designs, I would loved the new cut down piece but having looked at the original first, it is looking obvious that some thing is missing in the new one. But still a great looking jewelry piece.

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more