Skip to main content

New Handmade Bronze Jewellery Findings

I  became intrigued with bronze a few weeks ago and decided to try using it to make some findings and bangles as a change from copper. Bronze is widely available in the UK but you do have to search a bit for the thicker gauges if that's what you're after. I found a lot of the thinner gauges at wires.co.uk for reasonable prices although it is more expensive than copper.

Bronze is an alloy of copper and tin but is also mixed with other materials like phosphor, zinc, aluminium and silicon which alters it's properties depending on what the bronze is to be used for. I think the bronze I have is phosphor bronze and I did expect it to behave very much like copper when heated. It does behave a lot like copper but it does have it's quirks too.......

Quirk #1  When you form a ball on the end of the bronze wire the heat causes the copper content to rise to the surface giving you in effect a copper ball end.


The first photo shows the bronze wire straight after forming the {copper} balls and the second photo shows the headpins after oxidizing and cleaning up with the return of nice bronze balls!

Pickling didn't make any difference to the balls and I found the only way to get rid of the copper was to scrub the ball vigorously with wire wool or a brass brush which is a bit too time consuming. The copper did disappear on the ball ends after the wire was oxidized in LOS and cleaned with wire wool though which was very handy {and a bit strange}.

Quirk #2  I had planned on making a shiny version of the ball end bronze findings but the ball and the wire near it doesn't clean up well after heating to form the ball as mentioned above so I didn't manage to get a lovely shiny version.

Quirke #3  The oxidized effect from using LOS doesn't seem to "stick" as well to bronze as it does to copper and therefore it only needs a quick 10 minutes in the tumbler to polish it up a bit. Otherwise you end up with oxidized bronze findings that are just too bright!

Quirk #4  The LOS seems to effect the bronze differently depending on whether the bronze wire was heated or not. The finished oxidized versions of the ball end earwires and the hoop earwires {where I used the wire without heating it in any way} are completely different. The ball end version has a darker finish and hints of purple whereas the unheated hoop version is fairly uniform in colour and a golden brown tone...


The ball end earwires were pickled clean before oxidizing but the surface colour was changed by heating which effected the end results of using the LOS. It looks like the copper rises to the surface when the bronze is heated. I should imagine heat patina-ing the bronze would be quite successful {haven't tried that yet}.
I'll be listing my bronze findings in my Etsy shop over the next week or so.

Bronze v Copper

The main differences I found between copper and bronze is that bronze is harder and has a lower melting temperature. It doesn't take as much heat to solder as copper which is a good thing. 
Looking at my photos the oxidized bronze looks very similar to oxidized copper but when you put the two side by side you can see the bronze is more golden brown compared to the red brown of copper.

I've made a few bronze bangles in 7g, 9g and 12g {3.5mm, 3.0mm and 2.0mm} which turned out fine. Working out how long to tumble them after oxidizing so they didn't come out too light took a couple of attempts though! I also have some bronze sheet that I will be experimenting with soon - probably some etching and also having a go at creating a heat patina. 
Stay tuned!


Comments

  1. I have always seen bronze artifacts only in a shiny golden yellow color and seeing them in red is new for me (even though I know that bronze contains copper). its interesting

    ReplyDelete
  2. Nice work with the bronze Tracy. I love the warm brown tone of this metal.

    ReplyDelete
  3. Hi Tracy. I had the same problem with my bronze and had to sand it back quite violently to get the bronze colour back, which was so annoying as I lost some of my texture that way.
    But I found GIsela Kati has a solution: It's a pickle after you pickle (!) Vinegar and hydrogen peroxide. Really does do the trick if you want a shiny version of your headpins.
    http://giselakati.com/blog/2012/06/14/tip-17-using-super-pickle-taking-of-those-copper-spots-of-your-brass-and-bronze/

    ReplyDelete
    Replies
    1. Thanks so much Nana Louise! I'm going to try this as soon as I get some hydrogen peroxide.
      I'm in the middle of using some etched bronze sheet to make earrings and at the moment they are decidedly copper in hue after soldering :D

      Delete
  4. Bronze has such a unique colour. Love what you are doing with it!
    Heather :)

    ReplyDelete
  5. Great work :) I wanted to try working with bronze for quite some time ( because I love its colour ) but I couldn't find a bronze sheet anywhere (well, there are some, but really thin ) I wonder, did you see a bronze sheet in something like 0.5mm anywhere for sale?

    ReplyDelete
    Replies
    1. Thanks for your comment Kasia. I know what you mean about bronze sheet being hard to find. I bought some recently here -
      https://maccmodels.co.uk/materials-metal/phosphor-bronze-sections/phosphor-bronze-sheet.html.

      It does become plated in copper when you heat it though so you'll need to follow the tip given by Nana Louise above to clean it up!

      Delete
  6. This is great. I like the bronze look.

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco