Skip to main content

Enamel Experimenting And Gold!!


This week I have mostly been playing with enamel. 
I've been wanting to try using wire to create "cells" along the lines of cloisonne but nowhere near as exact {or skilled}.... no, I went for a slightly more rustic approach and used 16g {1.2mm} copper wire which I formed into jump rings then placed onto the partly fired second layer of opaque enamel and fired until the rings were fused into the enamel.



I pickled the copper rings beforehand to make sure they were nice and clean before placing on the enamel. I wanted them to stand a bit proud as I was then going to fill them with wet enamel.


I filled the rings with wet enamel then let the enamel dry naturally before firing.


They worked ok. There was some firescale on the surface of the enamel that pinged off the copper wire as it cooled but I think that adds to the rustic style. Next time I might try a thinner gauge wire but I do like the texture it gives the enamel in my first attempts.


I also spent some time teaching my friend Nicki how to torch enamel. She enjoyed herself and a few hours later went home with these pretties.


Gold!!
No, I haven't gone all Spandau Ballet on you, I'm referring to the simple gold studs I made recently after an order for gold ball earwires didn't go quite as planned. A customer asked if I could make her some gold ball earwires and I said yes of course I can and ordered the 9ct yellow gold wire. When I started to ball up the wire I discovered that it doesn't like balling up very much and quite a bit of it just shrivelled and turned black. I managed to get three out of the ordered five pairs of earwires made which my customer was happy with and then refunded the difference for the missing two pairs. 
Which left me with lots of mangled looking gold wire and a slightly annoyed feeling because I was quite a lot out of pocket..........until my brain clicked into gear and I remembered I have a rolling mill! Meaning I can melt the gold wire and put it through the rolling mill to make a small piece of gold sheet that I can then do things with!
So that's what I did and after adding a leaf vein texture to the gold sheet I made three pairs of simple studs.....


The studs have sterling silver posts and scrolls as I wasn't going to go as far as buy gold versions and gold solder. I'm very much still a silver girl at heart  
I still have a tiny amount of gold left so watch out for a silver pendant with a small gold ball somewhere about its person coming soon{ish}!


Comments

  1. Love the variation on the cloisonné, Tracy, and the gold/ spandau reference gave me a good giggle. Great recycling of the gold too, very creative! Have a good weekend.

    ReplyDelete
  2. Think the enamel work is fabulous, love the colour combinations.
    Heather :)

    ReplyDelete
  3. The enamel looks gorgeous - almost like a stained glass painting and so very art deco with the clean lines and bold colors. And the gold earrings, OMG they are out of this world, I cant believe that a person created them from wires

    ReplyDelete
  4. Hello - I just started enamelling about two months ago (yeah!). I found your site and am really enjoying your projects - you create beautiful things. Can you tell me what the orange colored enamel is called in the top photo. I love that color and would like get some and try my hand with that color. Thank you.

    ReplyDelete
    Replies
    1. Thanks for your comment!
      The orange is a Thompson opaque in sunset orange.

      Delete
    2. They're all beautiful, but I love the sunsent pair the most. WOWSTASTIC! like my son would say. You really are inspirational to me 'cos I've started doing some enamelling since I started reading your blog.

      Delete
    3. Thanks Antonia! I'm still finding my way with torch enamelling and have lots of things I still want to try :D

      Delete
  5. The enameled pieces are fantastic. I love the bold colors with the geomteric shapes! Nice work with the posts. It must be tricky to set posts just right on studs!

    ReplyDelete
    Replies
    1. Thanks Val, it can be hard to get stud posts dead centre on stud earrings sometimes. That's why I'm quite keen on making shapes that aren't circles!

      Delete
  6. All of them are looking so gorgeous I love last one i think its made by gold its perfect to carry on this small earrings. is its earrings ??

    ReplyDelete
  7. These are SOO FUN! What is the green color please? Thanks

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco