Skip to main content

Wrap Rings, Twisted Bangles and Fotor


I've had another busy week making rings and bangles for orders {which is great} so sometimes it's nice to just play without having to worry about getting things done for a certain time. I was inspired to make something quick and easy so thought I'd make a couple of no-solder rings seen in One Hour Rings by Helen Driggs. I loved the look of them and the fact they are adjustable {to a point}. They consist of a long triangle shaped piece of metal that is formed around a ring mandrel. I wasn't sure how sturdy they would be but after trying them with 20g/0.8mm sheet I would be quite happy to sell them knowing they will keep their shape well.



They become work-hardened pretty quickly as you shape them on the mandrel and I did need to anneal them in order to finish shaping them properly. I used a leaf vein texture for the first one which has to be one of my favourite textures. The second ring was textured using masking tape. It was a bit of an experiment and involved cutting small rectangles out of the tape with a scalpel before carefully sticking it on to the silver sheet and running it through the rolling mill. I tried a practice piece on copper where I cut the tape on top of the metal but I didn't like the cut marks that showed in the metal so did it the harder way!
The holes in the masking tape form the raised areas and the masking tape itself creates the texture on the rest of the metal. I'll be doing more experimenting with tape very soon as it's an easy way to texture with a rolling mill.


I also had a play with 2mm copper wire which I twisted into a barley twist then soldered to form bangles. The soldering was a bit tricky and it helps when forming the join to make sure you cut each end at the same point in the twist. I'll remember that next time!


Fotor
Have you seen those photos on Etsy where just one point is in focus and the rest of the image blurred? Or the main item is in colour and the rest of the image in black and white. Yes, so have I and I wanted to know how to do it so I Googled it and up popped lots of links including one for Fotor. It's a nice looking, free to use site that lets you edit, tweak, create photo collages and just play with images to your heart's content. You can then upload them to all the usual social network sites or save them to your computer. It has some of the editing features you find on Instagram but is much better in my opinion.

I had a little play with some of the photos I used above and with a photo of one of my cats.......


This is the Color Splash feature that allows you to choose which part of the image is coloured. You can also change the "background" colour too.


The Scratchy Pencil effect.


This effect is called Tile-Shift which lets you select an area to stay in focus and blurs the rest of the image.



With a frame added and a Moonbeam Lens-Flare on the ring image.


And finally a photo collage! 
What a very cool site. Check it out and play.................

Comments

  1. Interesting site, liking the collage'd images best.

    The barley twist bangles are lovely too, they have a 'Viking' body jewellery feel to them :)

    ReplyDelete
  2. beautiful textures - I love the leaf vein pattern

    ReplyDelete
  3. I totally love your blog and all of your fantastic creations! You've inspired me to get busy today! I'm wondering what the name of the Fodor site is? I hope that you have a great weekend!

    ReplyDelete
    Replies
    1. Thanks Lecia!
      The site is called Fotor (http://www.fotor.com)

      Delete
  4. Love the rings. I started to make something very similar years ago when I was on a course but I never got round to finishing it. I must pull the silver drawers out and have another look. :)

    ReplyDelete
    Replies
    1. Thanks Christal. Definitely get your silver drawers out!

      Delete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco