Skip to main content

Copper and Enamel Earrings


I really love the mix of copper and enamel in jewellery - the colour of the oxidized copper really makes the enamels jump. So continuing my "thing" about circles (it's been going on since I was a child!) I made enamelled discs in various colours and combined them with paddle-shaped copper "sticks."


 I haven't mastered the art of riveting enamelled pieces yet - it IS possible, I've seen other people do it but when I tried the enamel discs cracked. Another option would be to pin the enamelled discs by balling up silver wire on either side. I tried that too and only managed to ruin the enamelled piece. It did stick to the metal I wanted to attach it to but only because the enamel had refired and it would have cracked and fallen off eventually. 



So I stuck to wire wrapping the enamel disc to the metal - less risk of breaking anything!


I made these copper hoops a while ago and left them sitting on my work table until I decided what they would become. They became (......eventually) these wire wrapped hoops with three enamelled discs in turquoise, purple and mint wrapped onto the bottom so they can dangle in a shiny, happy, enamel way :D




Labels:

Comments

  1. AnonymousThursday, January 31, 2013

    Love the colour of the oxidized copper too!Nice earrings!
    Greetings from Greece!
    ❁Anna
    Snapshotjewellery

    ReplyDelete
  2. Linda - Earthshine.co.ukThursday, January 31, 2013

    They are all beautiful Lesley. i love reading your blog and seeing your creations.

    ReplyDelete
  3. MonicaThursday, January 31, 2013

    Mi piacciono tantissimo le cose che fai... e queste in modo particolare! Posso chiederti quali smalti usi con il rame? Io ho usato quelli che in Italia si usano con la ceramica Raku, ma non vanno bene. Mi puoi dire dove li acquisti?
    Complimenti!!!

    ReplyDelete
  4. Cinnamon JewelleryThursday, January 31, 2013

    Thanks for your comments!

    Monica - I translated yours too :D I use Thompson enamel powders which you can buy from the Thompson website or from a Thompson supplier in Denmark at enamelsupplies.com

    ReplyDelete
  5. Eve SmithThursday, January 31, 2013

    Lovely colours of enamels, I have not done any enameling for ages, I still have loads of thompson enamels left, I bought mine from a seller on etsy, barbara lewis. At painting with fire.

    ReplyDelete
  6. takıFriday, February 08, 2013

    lovely earning. so nice

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more