Skip to main content

That Christmas Feeling - Spice Biscuits!


I am slowly getting into the Christmas spirit this year. Watching Nigel Slater on the TV last night, who has to be my favourite TV chef for his calmness and sheer gorgeousness of what he cooks, I suddenly knew I had to make some Christmas spice biscuits!

So I trundled off to Sainsbury's this morning which wasn't half as busy as I thought it would be (just wait for next weekend!) to buy the ingredients and cookie cutters I needed. I had to make do with hearts as the snowflake cutters were all gone.
I used Nigel Slater's recipe (see below) and ended up with three baking sheets of biscuits in different heart sizes.
 I decorated them with cinnamon icing in a ....let's call it "abstract" fashion with artistic industrial size blobs for added interest....... more is definitely more where I come from :D


They taste delicious (I've eaten three so far) and make your house smell beautiful!

The Recipe

70g butter
80g light muscovado sugar
2 tbsp treacle
250g plain flour
1/2 tsp baking powder
2 tsp cinnamon
1 tsp ginger (I put in two)
1 egg yolk
3 - 4 tsp milk

1. Cream butter and sugar
2. Beat in treacle and egg yolk
3. Add flour, spices and baking powder which have been sifted and mixed thoroughly beforehand
4. Add milk until dough resembles pastry and knead gently
5. Roll out thinly, cut out shapes and spread out on baking sheets
6. Cook at Gas Mark 4/350F/180C for approx 12 - 14 mins
7. Cool and decorate with water icing

Comments

  1. Mmmmmmm! these look wonderul. Happy Christmas to you. Kx
    If you fancy popping one in the post down the road.... :-)

    ReplyDelete
  2. I bet these are as delicious as they are pretty! I love spiced cookies but recently had to go gluten freen. I have to try making a gluten free version! Hearts work for any time of the year. :)

    ReplyDelete
  3. Interesting how we cook around the world. I would need a dictionary to look up a few of the ingredients and i am curious if you have a scale in your kitchen to weigh out the ingredients? In Canada we use the metric system for size (250 ml of flour or 125 ml of milk) or imperial( 1 cup of flour or 1/4 cup or milk)if we are using an American recipe which is quite common.Were they good?

    ReplyDelete
  4. Thanks for your comments ladies!
    Cilla - they are delicious and the house smelled of cinnamon and ginger and treacle for hours after I made them. I used scales to measure out the ingredients but I often think the cup measuring system would be easier :D

    ReplyDelete
  5. Those look so amazing!!!

    ReplyDelete
  6. I’ve learn a few just right stuff here. Definitely value bookmarking for revisiting. I surprise how so much effort you set to make any such excellent informative website.

    ReplyDelete
  7. Yes it is really cool thing you shared here.

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco