Skip to main content

Finished! My Second Silver Jewellery Course Project


Here's the finished silver pendant I made as the second project for the silver jewellery evening class course I'm on. The "brief" for want of a better word, was amulets and charms. I didn't really know what an amulet was - I thought it was something you put things in - it's something you wear like a talisman to protect you from danger and bad luck so like a good luck charm really!

I loved the finger shape of an amulet I saw on a Jewish jewellery website so decided to go with that to start with. I also wanted to add texture with skeleton leaves and pierce out a shape as I haven't done any piercing before. I managed to break 3 saw blades piercing out the heart!


I melted some sterling silver to form balls then hammered and stamped them and soldered them above the heart. Then it was a case of filing and sanding, using the triangle file to add the cut in bits at the bottom and making and soldering a jump ring for hanging. I finished off by oxidizing it (of course!)


I'll be honest, the finished pendant is nothing like the original idea and design I drew apart from the shape and the pierced heart! It kind of evolved as I saw the shape and actual size of it as I was making it. The texturing is a bit uneven, the heart is off centre - it's definitely organic and a little bit quaint :D


I was the first one to finish - a couple of people on the course haven't even started their's yet (three weeks into the project!) and are still at the planning stage so for the next few weeks I can play and make what I like :D



Labels:

Comments

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more