Skip to main content

Silver-Filled Wire ~ An Affordable Alternative To Sterling

Browsing through the latest edition of Step By Step Wire Jewelry the other night I saw an article that mentioned silver-filled wire. I'd heard of gold-filled wire but not silver. I read a bit more and discovered silver-filled wire is pretty new and sounds like a great alternative to the much more expensive sterling silver wire.

So how is it different to silver plated wire I thought? Silver-filled has a thicker coating of sterling silver bonded to a copper or brass base. It can be hammered, oxidised and tumbled just like sterling and I should imagine it's less likely to wear off like plated wire can. I'm liking it more and more! Another plus is if you can wear sterling silver jewellery you'll be fine with silver-filled too.

I've just ordered some 20g from Etsy shop Cigarbox Supplies and at £4.36 for 19.5 ft it works out a hell of a lot less than sterling. I contacted another Etsy seller who uses it and asked her opinion - she loves it and said it behaves just like pure sterling wire. I'm not sure if it's available in the UK yet (probably not, maybe in a year or two!)

I can't wait for it to arrive so I can experiment and see for myself! Watch this space for an update in a week or two!

*Photo courtesy of Cigarbox Supplies
Labels:

Comments

  1. SophieFriday, May 27, 2011

    Sounds great! I may have to order some - silver is getting more and more expensive.

    ReplyDelete
  2. Miss Val's CreationsFriday, May 27, 2011

    Great review! I have been thinking about adding this wire to my store inventory. The price of sterling is out of control! ~Val

    ReplyDelete
  3. Cinnamon JewelleryFriday, May 27, 2011

    Definitely Val! If it looks ok I will start using it as an alternative too.

    ReplyDelete
  4. CindyThursday, June 16, 2011

    I've been hearing more and more about this wire, recently at Bead and Button as well. I'd love to give it a try too because I miss pulling out my sterling wire!

    ReplyDelete
  5. Chris Beads GaloreFriday, May 25, 2012

    I own a bead store and stock silver filled wire, along with Sterling, Gold Filled, Aluminium, Artistic, German and several craft wires. Due to the price of Sterling, I have been selling a good bit of Silver Filled wire. A lot of people are skeptical, because it is so new. I say try it out. You might love it.

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco ...
26 comments
Read more