Skip to main content

Purplelicious

Purple has been my favourite colour for as long as I can remember. When I was younger I had a dark purple carpet, purple flower curtains, lilac walls and a purple bedspread in my bedroom - I loved it!

When it comes to buying beads I'm always drawn to the purple ones and sometimes have to tell myself no. I didn't manage it when I saw these dyed purple freshwater pearls on Lima Beads though and ended up buying them! They are lovely, quite small (5mm) but a real electric purple and very shiny.

I decided they would look great with oxidised sterling silver so I made these disc earrings last week using my new larger size disc cutter, slightly thicker sheet silver than usual (the price of silver these days!) and the pearls. I cut a hole in the disc slightly off centre then texturised and domed them, added the pearls, into LOS, cleaned and polished and ready to be photographed.

I always find silver a bit tricky to photograph due to the reflection - they can turn out too bright or too grey depending on the angle but a bit of trickery with a piece of white card, which in other words means me holding said piece of white card at different angles to reflect some light onto them, normally sorts it out! I think they're rather glamourous and they will be appearing in my Folksy shop later today.


Comments

  1. Oh so very pretty with the hand made balled headpins and all such a nice added touch ttfn L:)

    ReplyDelete
  2. These are lovely! So good to see your new purple. :-)

    ReplyDelete
  3. They are gorgeous! My favourite colour is purple too x

    ReplyDelete
  4. Thank you!
    If I could have found a purple one last time I changed my car I would've bought it! I had to settle for kiwi green instead :D

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco