Skip to main content

A Distinct Lack Of Copper Studs


I've had some time recently to catch up with all those little jobs that tend to be pushed aside when I get busy. One of them is reviewing what jewellery I have for sale and making new stock to fill any gaps. Well one of the gaps I noticed was copper studs - they are fairly low in price so tend to sell quite quickly and I hadn't had much chance to make any new pairs.
So I made some more!

Studs are a good way of using up small pieces of metal sheet and I have a lot of those, especially etched and embossed copper sheet. I went for a variety of shapes - square, triangle, flower and teardrops. I do love a heart stud and they do sell well but my plastic heart shape template is a bit weird. The point at the top of the heart shape always comes out slightly off centre when I use a felt tip or scribe to mark the heart shape on the metal. I press that part down to stop the pointy bit moving but it nearly always comes out a bit off and can mean a lot of filing to get the two hearts exactly the same. So I don't use it that much. Maybe I need to find a better one :D

Luckily my other shape templates for teardrops, triangles and squares aren't weird.



These triangle studs make me think of pyramids.




Rounded square and teardrops shapes in good old leaf vein texture.


I also found some stamped copper sheet and used some of it for these teardrop studs. I love circles so tend to stamp circle designs a lot!


Cute etched daisy studs.
 They were originally going to be round then I decided to cut around the petals to make them a bit more interesting.

So that's the copper stud deficit sorted. 
  Next: bronze studs!



Copyright © 2015 Cinnamon Jewellery. All rights reserved.
Labels:

Comments

  1. Divya NMonday, November 16, 2015

    these studs are really modern and chic, I love the leaf vein studs

    ReplyDelete
  2. Miss Val's CreationsMonday, November 16, 2015

    Great designs! I can see why they sell well. Studs are the way to go for ladies with jobs that require a lot of time on the phone (at least that was the case with me when I worked).

    ReplyDelete
    Replies
    1. Cinnamon JewelleryTuesday, November 17, 2015

      Thanks Val. I never thought about the earrings-phone situation before!

      Delete
  3. Christals CreationsTuesday, November 17, 2015

    Lovely earrings. Great colour for Autumn too. ;)

    ReplyDelete
    Replies
    1. Cinnamon JewelleryTuesday, November 17, 2015

      Thank you, I've never really thought about the colour being autumnal before!

      Delete
  4. Kalaya SteedeTuesday, November 17, 2015

    Very nice Cinnamon! <3

    ReplyDelete
  5. UnknownFriday, November 20, 2015

    Now I know what I can do with all those scraps of copper I've accumulated! Gorgeous studs, I love the little triangles :)

    ReplyDelete
    Replies
    1. Cinnamon JewelleryFriday, November 20, 2015

      Thanks Claire! Yes studs are a great way to use up small scraps of sheet :D

      Delete
  6. VanessaMonday, November 23, 2015

    I love how simple and beautiful these are with the natural theme. Gorgeous and inspiring work!

    ReplyDelete
  7. JulieMonday, November 30, 2015

    I love the natural oranic feel with the designs of these earrings. You must be so proud of yur jewellery designs they are stunnng

    ReplyDelete
  8. NavThursday, December 10, 2015

    Great color for autumn! :)

    ReplyDelete
  9. CaramellaFriday, December 18, 2015

    Beautiful work!

    ReplyDelete
  10. fashion designing colleges in delhiMonday, January 11, 2016

    Nice designs. love these

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Torch Enamelling - What I've been Up To Recently!

I've admired enamelled jewellery for a while now and not too long ago did a blog post about Etsy seller tekaandzoe  and her wonderful kiln enamelled creations. I didn't think at the time that it was something I would ever be able to do as the cost of kilns plus lack of space would be a problem for me. That wasn't until I saw an advert for a torch enamelling tutorial from US jewellery supplies website Beaducation  by Steven James . It's a great tutorial showing the basics on how to torch enamel on copper. Of course I bought it! I then spent hours scouring the internet for more information on torch enamelling, where to buy the tools I'd need and of course the enamel powders. There are quite a few UK sites selling enamelling supplies and tools but as usual I found the US sites had more choice (why do we always lag behind?) I bought some enamel powders from a couple of UK sites to begin with - Cookson Gold have a good selection but bear in mind th...
37 comments
Read more

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or...
34 comments
Read more