Skip to main content

Rolling Mill Textures On Metal and Copper Jellyfish


I've been quite busy recently with the usual orders {bangles and findings} plus I had a custom request to make a pendant in silver using the buyers rather lovely chequer cut labradorite cabochon. I've just posted that off so will wait to hear from the buyer before I post a photo.

I've got several things on the go at the moment, mainly some more copper shapes to finish so I can do a bit more enamelling with decal decoration. I also have ideas for some studs using the bronze and silver pebbles I made a few weeks ago. But in the meantime I have had a bit of time to make some embossed bronze and sterling silver studs. After deciding I don't have a lot of success using texture cards with sterling silver in the rolling mill - the results vary from a very faint pattern to ok-ish but not as deep as I'd like. However, using etched copper or brass to add pattern to silver with the rolling mill is much more successful. 
I discovered I had some brass sheet that I'd etched a while ago using nail art plates...


The size is quite small {they're designed for nails after all!} but they do work really well for etching using nail varnish as the resist and you can buy lots of different styles and designs depending on your taste. If you want to learn more I wrote a blog post about using nail art plates to etch sterling silver in 2013.

I used the etched brass sheet to texture bronze and silver sheet and the designs came out well. You obviously get the negative of the original design but it still looked ok.

I used the embossed metal to make these simple stud earrings...

handmade bronze stud earrings © Cinnamon Jewellery 2015


sterling silver embossed stud earrings © Cinnamon Jewellery 2015



I also wielded my jeweller's saw and produced what I like to call stylized jellyfish earrings in copper with a stabilized turquoise cabochon and silver balls. Or if you turn them the other way up they could be stylized flames :D Anyway I like the shape!




For someone who struggled with sawing metal when I started and preferred to use shears if at all possible I now love using my saw and find it really therapeutic to cut intricate{ish} shapes out of metal. I have an idea for a pierced design probably in etched copper layered on top of coloured leather and riveted to a base of copper. I can see it in my mind but I'm not sure how long it will stay there before I get round to doing it.....☺



Copyright © 2015 Cinnamon Jewellery. All rights reserved.
Labels:

Comments

  1. Divya NFriday, April 17, 2015

    The stylised jelly fish looks really cool and is very fluid. May I ask,on what gauge sheet have you done the etching with nail paint?

    ReplyDelete
    Replies
    1. Cinnamon JewelleryFriday, April 17, 2015

      Hi Divya,
      It was a while ago but I think I used 18g and 20g (1.0mm and 0.8mm}.

      Delete
  2. Miss Val's CreationsFriday, April 17, 2015

    Beautiful work. I love the embossed studs. The jellyfish earrings are really unique. Great thought that you could flip them around to show flames instead!

    ReplyDelete
  3. JulieFriday, April 17, 2015

    These are lovely I love all the texture. Thanks for your comment on my work on the Spiral Fountain Jewellery Blog

    ReplyDelete
  4. MonicaSaturday, April 18, 2015

    Che meraviglia!!! Sei bravissima!!! E io invidio molto il tuo rolling mill...

    ReplyDelete
  5. Meiko LucasSaturday, April 18, 2015

    Loved the stud ear rings, they made me remember those classy old coins unearthed from those old civilization sites. Jellyfish earrings looked very stylish and perfect for a high profile social occasion.

    ReplyDelete
  6. KasiaFriday, April 24, 2015

    Beautiful work! And after reading the last paragraph, I can only hope that I will get to like sawing as well ;)

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Torch Enamelling - What I've been Up To Recently!

I've admired enamelled jewellery for a while now and not too long ago did a blog post about Etsy seller tekaandzoe  and her wonderful kiln enamelled creations. I didn't think at the time that it was something I would ever be able to do as the cost of kilns plus lack of space would be a problem for me. That wasn't until I saw an advert for a torch enamelling tutorial from US jewellery supplies website Beaducation  by Steven James . It's a great tutorial showing the basics on how to torch enamel on copper. Of course I bought it! I then spent hours scouring the internet for more information on torch enamelling, where to buy the tools I'd need and of course the enamel powders. There are quite a few UK sites selling enamelling supplies and tools but as usual I found the US sites had more choice (why do we always lag behind?) I bought some enamel powders from a couple of UK sites to begin with - Cookson Gold have a good selection but bear in mind th...
37 comments
Read more

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or...
34 comments
Read more