Skip to main content

Say Hello, Wave Goodbye - It's 2015!


2015: Happy New Year from dickdavid
Photo: Richard Wezensky on Flickr {Creative Commons}

First things first - Happy New Year!! Here's hoping it will be a good one for us all.

The title of this post is from a song by Soft Cell from 1981. That was the year I left school and it was one of my favourite songs of that time. It made me think of seeing in the new year and saying farewell to the old.

I've been looking back at my posts through 2014 and I think one of the biggest turning points concerning my jewellery making was the decision to put a garden shed in what was already a pretty small backyard and turn it into my workshed or "shed of wonders" as my friend Nicki describes it.


This photo was taken shortly after I moved in to the shed in April 2014 when there was sunshine and it was warm enough to leave the door open.....At the moment I'm using an electric radiator in the shed which is ok and does take the chill off but it can get pretty cold in there at times, although a spot of soldering soon warms the place up and I have been known to turn off the radiator and open the door at times even when it's cold outside

It's changed slightly inside now as new tools and other stuff have appeared - a flexshaft to replace the Dremel, a new disc cutter, things have been attached to the walls so I can hang other things from them, another of those red Ikea storage drawer units.... I also replaced the small very rickety table I used to make my findings on with a proper desk which is so much better. The plant in the photo {on the shelf} couldn't cope with the cold and kept dropping it's leaves like confetti when I was soldering so it's been replaced with a cyclamen which does likes the cold. I've just about used up all the space in there on the floor and walls so I don't think I'll be adding anything else very soon. Although......

And so what will 2015 bring jewellery -wise?
My word of the moment is bronze. It's not a metal I've taken much notice of when it came to making jewellery or findings but after whipping up a few bangles using 2mm round bronze wire yesterday I was delighted with the result. The natural shiny colour of the bronze is beautiful, similar to rose gold in my opinion and nothing like that ugly yellow tone you get with brass. Apologies to any brass lovers but I just don't like it for jewellery.



{Bronze bangles in their natural shiny state - the pink colour reflected in the metal is from my bright pink camera! Must buy a silver coloured one next time.....}

I'm very much a lover of oxidized copper and silver but I do really like the colour of the bronze in it's normal shiny state. I made these bangles to find out how the bronze behaves when soldering and being shaped and hammered. I'm glad to say it's very much like copper but needs a bit less heat for soldering. I haven't attempted to oxidize it yet but I do know it takes LOS just like copper which is good to know.
After a bit of research on Etsy I've found that there's not that many people selling handmade bronze findings which got me thinking.....and ordering some 20g bronze wire!

I'm planning on adding bronze bangles and findings to my Etsy shop in the next few weeks. I'm currently having a break from my shop and website so I can catch up with things and get some new stock made. This time of year always makes me want to get organized and act on ideas I've had but never had the time to get round to actually doing. So despite the cold weather and chilly shed working conditions I'm really looking forward to what 2015 will bring


Comments

  1. Good luck for your plans for 2015 and Happy New Year!

    ReplyDelete
  2. Happy New Year Tracy! Bronze is so beautiful. I am sure you will enjoy working this metal in 2015! It would look great combined with silver or copper too.

    ReplyDelete
    Replies
    1. Thanks Val! I'm already thinking of a bronze bangle with silver decoration :D

      Delete
  3. Happy New Year! I want to organize too but I'm lounging right now with little Cosmo. We are both Exhausted from 2014! Lol!!! Nice studio. I love it!

    ReplyDelete
    Replies
    1. Thanks Kalaya, enjoy your lounging!

      Delete
    2. Tracy...your studio is sooooo clean and looks organized! I'm jellie! :)

      Delete
    3. Kalaya, Don't worry, that photo was taken when I first got the shed so it was nice and clean. It doesn't always look like that now........:D

      Delete
  4. Happy New Year! Best Wishes for 2015! Bronze is fabulous, all 3 colours (silver, copper and bronze) together are fabulous! I love your shed, fantastic!

    ReplyDelete
  5. Grande Tracy! Buon 2015 di produzione allora!!!

    ReplyDelete
  6. A belated happy new year to you! Having done some jewellery work in a (glorified) shed I know how chilly they can get, but having your own space must really help make up for that. I'm looking forward to seeing how your bronze ideas work out - it's another metal I've yet to start working in, but it's on my list ;)

    ReplyDelete
    Replies
    1. Thanks Mossy and Happy New Year to you too!

      Delete
    2. Happy New Year to you and many many thanks for your inspiring blog posts! So sad to hear about Charlie, pets are family and grieving takes a long time - ask me, I know :-( Am thrilled reading your latest interest - bronze is so intriguing! I love the color too and have oft requested suppliers find bronze charms or simple castings to incorporate into jewelry but none responded. There's such a limited selection available and my own attempts at some simple chased items or handworking the metal have been underwhelming, lol! Be well, happy exploring and big hugs! :-)

      Delete
    3. Thanks for your comment Carol!
      I started making some bronze wire findings yesterday and it does have it's little quirks compared to copper but the end results are {I hope} going to be worth it :D

      Delete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...

Torch Enamelling - What I've been Up To Recently!

I've admired enamelled jewellery for a while now and not too long ago did a blog post about Etsy seller tekaandzoe  and her wonderful kiln enamelled creations. I didn't think at the time that it was something I would ever be able to do as the cost of kilns plus lack of space would be a problem for me. That wasn't until I saw an advert for a torch enamelling tutorial from US jewellery supplies website Beaducation  by Steven James . It's a great tutorial showing the basics on how to torch enamel on copper. Of course I bought it! I then spent hours scouring the internet for more information on torch enamelling, where to buy the tools I'd need and of course the enamel powders. There are quite a few UK sites selling enamelling supplies and tools but as usual I found the US sites had more choice (why do we always lag behind?) I bought some enamel powders from a couple of UK sites to begin with - Cookson Gold have a good selection but bear in mind th...

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or...