Skip to main content

A Refreshing Break And Some New Jewellery



I recently took a holiday from my online shops for the first time in nearly five years! Yes I actually put my Etsy and Folksy shops and my website in holiday mode for two weeks. And the reason for this? Did I jet off to the Seychelles/take a road trip across the States/ move all my jewellery tools, equipment and "stuff" into what was a garden shed but is now my jewellery workroom? All very exciting options but it was the last one, the other two will just have to wait until my next break in another five years! 

Yes, I now have my own space to work in which is like being in heaven after working on the dining room table and in the kitchen for nearly five years, having to get stuff out and put it away again (then get it out again when I realize I need to do a bit more soldering!) I love my jewellery shed, it's not quite there yet with the organizing and finding homes for everything but it's mine. I'm planning on writing a post about it next week with photos once I've finished the final tweaking.

I did take the opportunity to catch up with making new pieces once I'd moved into the shed as I didn't have to worry about stopping to do findings orders and other things that usually stop me making jewellery. It was lovely actually :D
I used some of the shiny, sparkly cabs and half-drilled pearls I bought from Joopy Gems and made a few pendants and several pairs of earrings...




This is a hollow form pendant I started at jewellery night class. It started life as two different size diameter pieces of copper tube that I added a front and back to and a white pearl cabochon. The etched design was from a really detailed stamp that I wasn't sure would work but it did and I think it's a lovely busy pattern.






I used some silver textured in my rolling mill and added some smooth silver as an overlay with pale pink rose quartz rose cut cabs. I think they look like freaky bugs!






Believe it or not these are the first gemstone studs I've ever made plus a white pearl pair. The labradorite cabs have lovely flashes of green-gold and the peach moonstone are a sweet dot of colour.






These copper post earrings remind me of "spinning jennies" more formally known as the seeds of the ash tree. The green/gold quartz really sparkle in the light. This is the first time I've used posts in a longer style of earring rather than the usual stud style.




 And finally another two hollow form pairs I started at night class. These started life as round copper tube that I shaped using some bezel mandrels I bought a while ago. I always knew I'd find a use for those square/hexagon/triangle mandrels that were part of the set! I turned the square shapes into beads with a hole top and bottom and added them to some copper wire and thin tube to make a pair of twist earrings. The triangles have a leaf vein texture on the front and smooth sides and back. There's something very satisfying about making hollow forms and seeing the transformation from a solder covered piece of metal ( in my case anyway!) to a form that through filing and sanding ends up smooth with a barely visible solder line.

Look out for my post with photos (yay!) of my new workspace coming soon.




Comments

  1. LOVE playing with hollow form, don't you? These are lovely, absolutely.
    And having your own dedicated space - now you wonder how you ever did otherwise, Ill bet!

    ReplyDelete
  2. Thanks Lynn, and yes it's lovely having my own space :D

    ReplyDelete
  3. I just love your hollow forms, but especially those square ones! I'll dream of one day soldering like that.

    ReplyDelete
  4. Loving your new jewellery - especially the rose quartz earrings - I love the combination of texture and stonesetting. Congratulations on your new workspace. I also have a new space (same place just different and extended) - I was feeling suffocated in my old working area.
    Happy days!
    Kristin :)

    ReplyDelete
  5. Thanks Kristin. I'm loving my jewellery shed and can just get on with things now which makes the day seem longer somehow :D

    ReplyDelete
  6. I can just imagine how thrilled you are to have your own special place! These designs are absolutely stunning and looking forward to seeing more!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...

Torch Enamelling - What I've been Up To Recently!

I've admired enamelled jewellery for a while now and not too long ago did a blog post about Etsy seller tekaandzoe  and her wonderful kiln enamelled creations. I didn't think at the time that it was something I would ever be able to do as the cost of kilns plus lack of space would be a problem for me. That wasn't until I saw an advert for a torch enamelling tutorial from US jewellery supplies website Beaducation  by Steven James . It's a great tutorial showing the basics on how to torch enamel on copper. Of course I bought it! I then spent hours scouring the internet for more information on torch enamelling, where to buy the tools I'd need and of course the enamel powders. There are quite a few UK sites selling enamelling supplies and tools but as usual I found the US sites had more choice (why do we always lag behind?) I bought some enamel powders from a couple of UK sites to begin with - Cookson Gold have a good selection but bear in mind th...

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or...