Skip to main content

Handmade Bangles - A Version In Sterling Silver


I love making bangles and have so far just made them using copper wire. These, much to my surprise, have proved really popular and I must now be the copper bangle making expert of old Eastbourne town!

I had a recent commission for a cuff bangle which was to be a Father of the bride present. The theme of the wedding was amethyst so the customer wanted two small amethyst cabs set at each end of the copper cuff.


I used 1.5mm gauge copper sheet for the cuff which I textured with a hammer, shaped then set the 4mm amethyst cabs. Making the bezels was fiddly as the cabs are so small and I did keep my fingers crossed slightly when soldering the bezels to the bangle but it worked out fine and my customer was pleased. I now have plans to use more of the 1.5mm sheet to make more bangles.

So of course my mind eventually started wandering and thinking about using sterling silver. I have various gauges of silver wire and did think of using 1.6mm but when I tried it with copper the bangle was a bit too easy to bend out of shape even after work hardening and tumbling so I decided to go for 1.8mm which worked much better and forms a nice slim but sturdy bangle.


I think I will try 2mm wire next time as the weight should still come under 7.78g so I wouldn't need to hallmark the bangles. Strangely I found soldering the thinner gauges of wire much harder than the thicker 2.6mm and 3.25mm copper I'm used to using! There isn't much tension in the wire to hold the join together and I ended up holding the two ends together with my pliers to stop them moving as the wire heated up when I was soldering.
The silver bangles make a lovely jingling sound when you wear them and as it's my birthday soon I think I will treat myself with a set :D
Labels:

Comments

  1. Keith@ Vintage Crab Jewelry and CraftsFriday, October 04, 2013

    Exceptional quality work, beautiful!

    ReplyDelete
  2. AnonymousSaturday, October 05, 2013

    Sighhhh...I keep meaning to try making bangles but my ring fetish has taken over my life lol...love the sterling! Beautiful :) xx

    ReplyDelete
  3. Cinnamon JewellerySaturday, October 05, 2013

    Ithink maybe I now have a bangle fetish.........

    ReplyDelete
  4. AnonymousMonday, October 07, 2013

    Ha HA....so funny how we get on a "making train" and have to ride it till we get totally fed up and ready to move on to something else! lol

    ReplyDelete
  5. Blackpool Music GroupThursday, October 17, 2013

    Once again, a nice choice of materials!

    ReplyDelete
  6. VedikaFriday, October 25, 2013

    Really awesome work.

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m...
32 comments
Read more

Torch Enamelling - What I've been Up To Recently!

I've admired enamelled jewellery for a while now and not too long ago did a blog post about Etsy seller tekaandzoe  and her wonderful kiln enamelled creations. I didn't think at the time that it was something I would ever be able to do as the cost of kilns plus lack of space would be a problem for me. That wasn't until I saw an advert for a torch enamelling tutorial from US jewellery supplies website Beaducation  by Steven James . It's a great tutorial showing the basics on how to torch enamel on copper. Of course I bought it! I then spent hours scouring the internet for more information on torch enamelling, where to buy the tools I'd need and of course the enamel powders. There are quite a few UK sites selling enamelling supplies and tools but as usual I found the US sites had more choice (why do we always lag behind?) I bought some enamel powders from a couple of UK sites to begin with - Cookson Gold have a good selection but bear in mind th...
37 comments
Read more

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or...
34 comments
Read more