Skip to main content

Using Enamel Cabochons In My Jewellery



I know how to torch enamel and I know how to bezel set cabochons so I thought it was about time I put the two together! I've been thinking about it for "ages" and last week I actually got round to doing it. I started small (of course I did, I like to make life difficult!) and made four 9mm cabs from copper.

The enamelling was a bit tricky and Klyre Fire was called for so the enamel powder stuck to the front of the cab and didn't slide off. I discovered it was better to gently (very gently!) dry the klyre fire using my torch than let it air dry as it is very easy to knock the cab once the klyre fire is dry and watch the enamel slide right off. I got there in the end and produced two dusky pink and two sea green enamel cabs.


I was then slightly paranoid that they would crack but as they are formed (domed) and counter enamelled for added stability they were fine. I had to be a bit more careful than normal when it came to handling them and when I set them as they are a bit more delicate than stone cabs. I used my wooden bezel pusher - a customised peg in other words - to set them and it worked out fine. I made a copper and silver heart pendant using the zentangle etched copper I made recently and a pair of sterling silver disc earrings with the green enamel cabs.



I've yet to decide what to do with the second pink cab but at the mo I'm thinking a silver pendant.........maybe!
I enjoyed making both of these pieces and can feel myself slowly getting more confident with my soldering. I love that making my own enamelled cabs means I can make virtually whatever colour I want. Next time I'll make life easier and go bigger and will probably take photos too :D
Labels:

Comments

  1. UnknownFriday, August 02, 2013

    That locket was superb really.

    ReplyDelete
  2. DeborahRead.comFriday, August 02, 2013

    Beautiful work

    ReplyDelete
  3. Cinnamon JewelleryFriday, August 02, 2013

    Thank you!!

    ReplyDelete
  4. littlecherryhillTuesday, August 06, 2013

    Lovely work Tracy! Spesh love those silver earrings, you wouldn't ever guess they were enamelled cabs, well done!

    ReplyDelete
  5. Vickie DevenportFriday, March 03, 2017

    I can't help but feel we must be on the same wave length.....ever since I've discovered your wonderful blog, I have been amazed with the work you are doing! It is like I have found a kindred spirit in the process of learning new jewelry techniques, and I love how you describe your new experiences! I have been thinking about trying a torch fired enamel cab, and voile! You have given me inspiration! Thank you so very much for the work you share, and the beautiful artist that you are!

    ReplyDelete
    Replies
    1. Cinnamon JewelleryFriday, March 03, 2017

      Thanks for your lovely comment Vickie, it's good to know my posts are useful. I've just got a kiln and am in the process of getting used to enamelling with it....it's a bit of a learning curve :D

      Delete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

My Jewellery Shed Gets A Lick Of Paint

At the end of last summer, after an incredibly busy few months jewellery-wise, I decided to take a break and repaint my shed. I'd painted it a pale green colour when I first got it and it was starting to look a bit faded and sad. So I did what I expect most people do and started looking online at what wonderful colour I could repaint it. There are lots of great colours out there by Cuprinol and Ronseal and the DIY stores own brands. I took a long time deciding on a colour then got in the car to go and buy the paint. That's when I discovered that B&Q and Homebase only carry a limited selection of shed paint colours {8 if you're lucky} and if you then find something in stock you do like they quite often don't have it in the size pot you need! So the colour I bought was a bit of "Oh buggar it, that'll have to do". Luckily it turned out to be similar to what I'd originally wanted by the time I'd finished the third coat - yes it took three coat...
5 comments
Read more

Etching Copper With Ferric Chloride

 I decided recently that etching is one of my favourite things to do with metal. I read about it online quite a while ago and immediately thought it looked cool but the thought of using an "acid" and having to find somewhere to store it (a perennial problem when you don't have a workroom) put me off. So instead I admired etched copper from afar. Until I got a bee in my bonnet about it again and bought Lexi Erikson's copper etching dvd. Lexi Erikson is very good at explaining jewellery techniques and making them seem much more straightforward than they first appear. I already knew that ferric chloride was a salt and not an acid so wouldn't eat my flesh through to the bone if I accidently spilled some on my hand. The dvd made me feel much more comfortable about having a go so I ordered some ferric chloride from ebay and bought some stamps and StazOn ink from a local craft shop. My first attempt went ok but for some reason I left the copper to etch for an hou...
11 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more