Cinnamon Jewellery

My recent holiday gave me a chance to come up with a few new copper bangle designs. They are a good seller in my Etsy shop and website so I figure expanding the range makes good sense. I started by making an intertwined set using 2.6mm round copper wire. It's very simple to link the bangles - it just consists of an extra step once you've soldered, shaped and textured them. Two of the bangles need to be cut open again at the solder join and one of them linked with the remaining soldered bangle and the other bangle linked through the first two before they are soldered closed again and finished. I made the bangles slightly bigger than normal to allow for the space taken up by the bangles being linked. I then had a bit of a brain freeze moment about it all and thought they were still going to be too small but opening them out fully and measuring the inside diameter reassured me they were the right size {does that make sense? I hope so!} Next I made a set using some...

I've been meaning to make some copper bangles with ceramic beads for a while now. I bought some pretty pinkish and green ceramic beads a while ago and they've sat in my bead box patiently waiting for their moment of glory. It has now arrived! I decided to photograph how I made the bangles in the hope it will inspire someone/anyone to have a go. It's an easy project and as long as you use ceramic or lampwork beads or anything that has been kiln annealed you should find the beads behave themselves during soldering and don't explode. The most important thing to consider before you start is to make sure your bead hole is big enough for the wire you are going to use. The holes in these pink ceramic beads were a little bit smaller than the 2mm wire I used so I made them bigger using a round needle file. I tried various methods for enlarging the hole - using a drill bit and ball burr with my Dremel but they didn't do a lot so I stuck with using the file. ...

One of my favourite jewellery makers to watch on YouTube is Soham Harrison . His calm manner and straightforward explanations make him very easy to watch. He posts new videos regularly and I caught up with some of them a while ago. One of the videos showed how to make twisted bangles using round wire. I make a lot of bangles in copper and silver so I'm always on the lookout for new ideas and I really liked the look of them. They are very easy to make and basically involve annealing a length of round wire before flattening three sections of it using a rolling mill or hammer. You then anneal the wire again, fix one end into a vice and grip the other end in locking pliers and twist. The whole piece of wire turns creating twists in the flattened sections. You then cut the wire to length and make a bangle as usual. A really simple idea with very pretty results! Here's a few I made...... ...with a single twist. This was my first practice bangle with just one twi...

I've had another busy week making rings and bangles for orders {which is great} so sometimes it's nice to just play without having to worry about getting things done for a certain time. I was inspired to make something quick and easy so thought I'd make a couple of no-solder rings seen in One Hour Rings by Helen Driggs . I loved the look of them and the fact they are adjustable {to a point}. They consist of a long triangle shaped piece of metal that is formed around a ring mandrel. I wasn't sure how sturdy they would be but after trying them with 20g/0.8mm sheet I would be quite happy to sell them knowing they will keep their shape well. They become work-hardened pretty quickly as you shape them on the mandrel and I did need to anneal them in order to finish shaping them properly. I used a leaf vein texture for the first one which has to be one of my favourite textures. The second ring was textured using masking tape. It was a bit of an experiment and inv...

Why make simple copper bangles when you can make "tricky" copper bangles? That's tricky to me anyway, other people would probably find them super simple! I'm talking about copper bangles with five small sterling silver concave discs soldered to the outside. Not hard to make just tricky. I wanted to combine copper and silver as I love the look of the two metals together. The fiddly bit was the soldering of the silver discs to the outside of the copper bangles. I wanted then evenly spaced and was about to Google how to divide a circle into five parts when I realized I know how to do this already - just remember the length of wire you used for the bangles and divide by five! After quite a lot of faffing about with my third hand and my fibre board soldering block (and swearing, mustn't forget that) I got the first disc soldered to the first bangle. Only 14 more to go. I had to pickle in between each soldering too which made it quite a laborious process but I...