Skip to main content

Experimenting With Ice Resin


Or should I say more experimenting with Ice Resin! As a continuation to my blog post last week I have been at it again and doing some more interesting things with epoxy resin. 

My first attempts didn't cure properly, possibly because I didn't measure the two parts accurately enough or it might have been because I didn't mix the acrylic paint properly before adding it to the resin. Anyway, my second attempts which were the swirly abstract shapes you can see in the bottom right photo below did cure I'm glad to say. They are now leaning up against my work shed window and look really pretty with the light shining through them :D 


So armed with slightly more but still a fairly small amount of knowledge about resin I tried again on Wednesday. I made a few pairs of copper earrings, one with two little copper bowls soldered to the bottom and two more with pierced out shapes, then added some coloured resin.




In my haste to get going with the resin I didn't make sure the copper was clean so ended up with some copper dust in the bright green resin in the bullet shape earrings top left. I also wasn't very keen on my colour choices for the bullet shape earrings.......

I then mixed some more resin for a pendant and used some pretty pinks and oranges {which I did like!} Please excuse the poor photo but the light was going by the time I took it.


I took some more photos in the slightly better {but not much} light yesterday morning after they'd had several hours in the airing cupboard. I discovered a hair in one of the purple rectangles in the bullet earrings but as I don't like these very much anyway I'm not too bothered! They'll need a couple more days to cure properly then I'll oxidize the copper and add earwires to the other two pairs.



I'm not sure whether to sand the two resin "dots" completely flat in these earrings or leave them. Decisions! You can see my camera reflected in them as I took the photo, it's not another hair :D

I've got to say I am more drawn to the abstract squiggly wire designs and would really like to make earrings using this design. Which means creating a matching pair.... 

I flattened and soldered some more copper wire and rounded it to smooth out any kinks then started playing with my graduated pliers.


I soon discovered the smaller lengths of wire weren't long enough to be able to make anything big enough so I ended up with just one pair of fairly well matched earrings in the making....


These now need to be soldered at the points where the wires touch then filed and sanded flat. Then I'll solder a piece of copper tube to the top for the earwire. I'm really keen to get some more earrings made so I spent some time yesterday afternoon making more lengths of flattened wire - longer this time so I can make a few more pairs today.

Then I'll be able to get the resin and acrylic paints out again and start playing!

The results of all this and the finished earrings should hopefully be posted next week.....



Labels:

Comments

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

My Jewellery Shed Gets A Lick Of Paint

At the end of last summer, after an incredibly busy few months jewellery-wise, I decided to take a break and repaint my shed. I'd painted it a pale green colour when I first got it and it was starting to look a bit faded and sad. So I did what I expect most people do and started looking online at what wonderful colour I could repaint it. There are lots of great colours out there by Cuprinol and Ronseal and the DIY stores own brands. I took a long time deciding on a colour then got in the car to go and buy the paint. That's when I discovered that B&Q and Homebase only carry a limited selection of shed paint colours {8 if you're lucky} and if you then find something in stock you do like they quite often don't have it in the size pot you need! So the colour I bought was a bit of "Oh buggar it, that'll have to do". Luckily it turned out to be similar to what I'd originally wanted by the time I'd finished the third coat - yes it took three coat...
5 comments
Read more

Etching Copper With Ferric Chloride

 I decided recently that etching is one of my favourite things to do with metal. I read about it online quite a while ago and immediately thought it looked cool but the thought of using an "acid" and having to find somewhere to store it (a perennial problem when you don't have a workroom) put me off. So instead I admired etched copper from afar. Until I got a bee in my bonnet about it again and bought Lexi Erikson's copper etching dvd. Lexi Erikson is very good at explaining jewellery techniques and making them seem much more straightforward than they first appear. I already knew that ferric chloride was a salt and not an acid so wouldn't eat my flesh through to the bone if I accidently spilled some on my hand. The dvd made me feel much more comfortable about having a go so I ordered some ferric chloride from ebay and bought some stamps and StazOn ink from a local craft shop. My first attempt went ok but for some reason I left the copper to etch for an hou...
11 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more