Skip to main content

Enamel Experimenting And Gold!!


This week I have mostly been playing with enamel. 
I've been wanting to try using wire to create "cells" along the lines of cloisonne but nowhere near as exact {or skilled}.... no, I went for a slightly more rustic approach and used 16g {1.2mm} copper wire which I formed into jump rings then placed onto the partly fired second layer of opaque enamel and fired until the rings were fused into the enamel.



I pickled the copper rings beforehand to make sure they were nice and clean before placing on the enamel. I wanted them to stand a bit proud as I was then going to fill them with wet enamel.


I filled the rings with wet enamel then let the enamel dry naturally before firing.


They worked ok. There was some firescale on the surface of the enamel that pinged off the copper wire as it cooled but I think that adds to the rustic style. Next time I might try a thinner gauge wire but I do like the texture it gives the enamel in my first attempts.


I also spent some time teaching my friend Nicki how to torch enamel. She enjoyed herself and a few hours later went home with these pretties.


••• Gold!! •••
No, I haven't gone all Spandau Ballet on you, I'm referring to the simple gold studs I made recently after an order for gold ball earwires didn't go quite as planned. A customer asked if I could make her some gold ball earwires and I said yes of course I can and ordered the 9ct yellow gold wire. When I started to ball up the wire I discovered that it doesn't like balling up very much and quite a bit of it just shrivelled and turned black. I managed to get three out of the ordered five pairs of earwires made which my customer was happy with and then refunded the difference for the missing two pairs. 
Which left me with lots of mangled looking gold wire and a slightly annoyed feeling because I was quite a lot out of pocket..........until my brain clicked into gear and I remembered I have a rolling mill! Meaning I can melt the gold wire and put it through the rolling mill to make a small piece of gold sheet that I can then do things with!
So that's what I did and after adding a leaf vein texture to the gold sheet I made three pairs of simple studs.....


The studs have sterling silver posts and scrolls as I wasn't going to go as far as buy gold versions and gold solder. I'm very much still a silver girl at heart ♥ 
I still have a tiny amount of gold left so watch out for a silver pendant with a small gold ball somewhere about its person coming soon{ish}!


Labels:

Comments

  1. sasha + max studioFriday, August 15, 2014

    Love the variation on the cloisonné, Tracy, and the gold/ spandau reference gave me a good giggle. Great recycling of the gold too, very creative! Have a good weekend.

    ReplyDelete
  2. littleRamstudioFriday, August 15, 2014

    Think the enamel work is fabulous, love the colour combinations.
    Heather :)

    ReplyDelete
  3. Divya NFriday, August 15, 2014

    The enamel looks gorgeous - almost like a stained glass painting and so very art deco with the clean lines and bold colors. And the gold earrings, OMG they are out of this world, I cant believe that a person created them from wires

    ReplyDelete
  4. AnonymousFriday, August 15, 2014

    Hello - I just started enamelling about two months ago (yeah!). I found your site and am really enjoying your projects - you create beautiful things. Can you tell me what the orange colored enamel is called in the top photo. I love that color and would like get some and try my hand with that color. Thank you.

    ReplyDelete
    Replies
    1. Cinnamon JewelleryFriday, August 15, 2014

      Thanks for your comment!
      The orange is a Thompson opaque in sunset orange.

      Delete
    2. AnthoniaMonday, August 18, 2014

      They're all beautiful, but I love the sunsent pair the most. WOWSTASTIC! like my son would say. You really are inspirational to me 'cos I've started doing some enamelling since I started reading your blog.

      Delete
    3. Cinnamon JewelleryMonday, August 18, 2014

      Thanks Antonia! I'm still finding my way with torch enamelling and have lots of things I still want to try :D

      Delete
  5. Miss Val's CreationsMonday, August 18, 2014

    The enameled pieces are fantastic. I love the bold colors with the geomteric shapes! Nice work with the posts. It must be tricky to set posts just right on studs!

    ReplyDelete
    Replies
    1. Cinnamon JewelleryTuesday, August 19, 2014

      Thanks Val, it can be hard to get stud posts dead centre on stud earrings sometimes. That's why I'm quite keen on making shapes that aren't circles!

      Delete
  6. Sonal SahrawatWednesday, September 24, 2014

    All of them are looking so gorgeous I love last one i think its made by gold its perfect to carry on this small earrings. is its earrings ??

    ReplyDelete
  7. UnknownTuesday, March 05, 2019

    These are SOO FUN! What is the green color please? Thanks

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.
Any comments containing links will be deleted so please don't waste your time.....

Popular posts from this blog

My Jewellery Shed Gets A Lick Of Paint

At the end of last summer, after an incredibly busy few months jewellery-wise, I decided to take a break and repaint my shed. I'd painted it a pale green colour when I first got it and it was starting to look a bit faded and sad. So I did what I expect most people do and started looking online at what wonderful colour I could repaint it. There are lots of great colours out there by Cuprinol and Ronseal and the DIY stores own brands. I took a long time deciding on a colour then got in the car to go and buy the paint. That's when I discovered that B&Q and Homebase only carry a limited selection of shed paint colours {8 if you're lucky} and if you then find something in stock you do like they quite often don't have it in the size pot you need! So the colour I bought was a bit of "Oh buggar it, that'll have to do". Luckily it turned out to be similar to what I'd originally wanted by the time I'd finished the third coat - yes it took three coat...
5 comments
Read more

Etching Copper With Ferric Chloride

 I decided recently that etching is one of my favourite things to do with metal. I read about it online quite a while ago and immediately thought it looked cool but the thought of using an "acid" and having to find somewhere to store it (a perennial problem when you don't have a workroom) put me off. So instead I admired etched copper from afar. Until I got a bee in my bonnet about it again and bought Lexi Erikson's copper etching dvd. Lexi Erikson is very good at explaining jewellery techniques and making them seem much more straightforward than they first appear. I already knew that ferric chloride was a salt and not an acid so wouldn't eat my flesh through to the bone if I accidently spilled some on my hand. The dvd made me feel much more comfortable about having a go so I ordered some ferric chloride from ebay and bought some stamps and StazOn ink from a local craft shop. My first attempt went ok but for some reason I left the copper to etch for an hou...
11 comments
Read more

Amazing Enamel Effects

Buying a kiln recently has given me the chance to experiment with enamelling on larger pieces of copper and to produce some really cool effects. These effects happen when you combine different types of enamel. I usually use smaller flat pieces of copper for making enamelled earrings and have had some of these effects happen when firing with a torch but they are much more obvious when you use larger pieces. I made a few practice pieces which you can see in the photos below. This was flux {a transparent enamel not to be confused with soldering flux!} applied straight onto copper and fired until the copper was a bright golden colour. Then I added a layer of liquid enamel in green and red over the flux and fired again.  The lines and spots form when the enamel becomes hot enough to start moving and in this case the transparent pushes through the liquid enamel layer forming these cool lines and spots. The effect is better in the green liquid enamel than the red.  N...
31 comments
Read more