Skip to main content

I've Got A Bit Of A Thing Going On


A disc "thing" that is. The last few pairs of earrings I've made all feature discs in copper or enamel, with or without beads and with a central "dot".

I'm always looking for ways to attach "things" to other "things" when I make jewellery - I think it makes things more interesting. You can do it with rivets, soldering (still learning!) or with wire.
I fancied trying it with wire which is probably the easiest of the three and came up with these designs...


copper and green impression jasper


enamel and copper


enamel and sterling silver

I'm planning on making more of these with enamelled flowers instead of discs because I think they're quite sweet :D

•• Fold Forming ••

I felt like a bit of metal bashing the other day so decided on some very basic fold forming - annealing metal to soften it then creating a bend which you then flatten with a mallet or hammer, anneal again and open up to reveal a "fold" across the metal. I decided to enamel it too and came up with these colourful oval earrings...

The fold is quite tight as I hammered it pretty flat then stamped lines on it once it was opened out. Enamelling it was a bit fiddly but I love the definite division it creates. I think they look a bit like Easter eggs :D

Labels:

Comments

  1. Nana Louise NielsenWednesday, March 28, 2012

    They looks great. I particularly like the two top ones. There's something about the bright copper colour with the blue and green that really pleases me. Envious :o)

    ReplyDelete
  2. ZoeThursday, March 29, 2012

    I'm always pleased when I see a blog post from you appear on my dashboard. I love the work you create, always beautiful :-)

    ReplyDelete
  3. Cinnamon JewelleryThursday, March 29, 2012

    Thank you Nana and Zoe :D

    ReplyDelete
  4. DinkyflowerpotsTuesday, April 03, 2012

    Love these earrings! The disc ones remind me of those puzzle drawings you used to get in comics as a kid. The particular one I'm thinking of was of a mexican riding a bike? (as viewed from above).

    B x

    ReplyDelete
  5. AnonymousSaturday, April 07, 2012

    love the sterling silver and enamel. so pretty x

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m
32 comments
Read more

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or
34 comments
Read more

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco
26 comments
Read more